Publications

Morel, A. Akrad, R. Sehab, T. Azib, and C. Larouci, “Open-Circuit Fault-Tolerant Strategy for Interleaved Boost Converters via Filippov Method,” Energies 2022, vol. 15, no. 352, pp. 1-23, MDPI, 2022.

Bello, T. Azib, C. Larouci, M. Boukhnifer, N. Rizoug, D. Patino, and F. Ruiz,“Motor efficiency modeling towards energy optimization for two-wheel electric vehicle,” Energy Efficiency, vol. 15, no. 3, pp. 1-14, Springer Netherlands, 2022.

Morel, R. Vlad, and J. Morel, “Mini and Maxi chaotic attractors of the Lorenz related systems,”International Journal of Applied and Computational Mathematics,” vol. 22, no. 1, pp. 66-81, 2022.

Hongyi, R. Sehab, S. Azouigui, and M. Boukhnifer, “Application and Comparison of Deep Learning Methods to Detect Night-Time Road Surface Conditions for Autonomous Vehicles,” Journal of Electronics 2022, Special Issue AI-Based Autonomous Driving System “., vol. 11, no. 786, MDPI, mar 3 2022.

Traoré, M. Doumiati, J. Olivier, and C. Morel, “Adaptive Power Sharing Algorithm Combined with Robust Control for a Multi-source Electric vehicle: Experimental Validation,” International Review of Electrical Engineering (I.R.E.E.),2022.

Alyoussef, A. Ahmad, R. Sehab, C. Morel, and I. Kaya, “Velocity Sensor Fault-Tolerant Controller for Induction Machine Using Intelligent Voting Algorithm,” Journal Energies 2022, vol. 15, no. 384, MDPI, apr 22 2022.

Benabed, and A. Boulbair, “PM10, PM2. 5, PM1, and PM0. 1 resuspension due to human walking,” Air Quality, Atmosphere and Health, pp. 1-10, Springer Netherlands, apr 18 2022.

Boulbair, A. Benabed, B. Janssens, K. Limam, and W. Bosschaerts, “Numerical study of the human walking-induced fine particles resuspension,” Building and Environment, vol. 216, pp. 109050, Pergamon, may 15 2022.

Benabed, and A. Boulbair, “Numerical analysis of thermal comfort and air freshness generated by a multi-cone diffuser with and without lobed inserts,” Journal of Building Engineering, pp. 104632, Elsevier, may 11 2022.

Ceschia, T. Azib, O. Bethoux, and F. Alves, “Multi-Criteria Optimal Design for FUEL Cell Hybrid Power Sources,” Energies, vol. 15, no. 9, pp. 3364, MDPI, may 5 2022.

Morel, R. Vlad, and J. Morel, “Mini and Maxi chaotic attractors of the Lorenz related systems,” International Journal of Applied and Computational Mathematics vol. 22, no. 1, pp. 66-81, 2022.

Bourdim, T. Azib, and K. E. Hemsas, “Frequency splitting approach using wavelet for energy management strategies in fuel cell ultra-capacitor hybrid system,” Journal of Measurements in Engineering, in press, 2022.

Zang, S. Azouigui, S. Saudrais, M. Hébert, and W. Gonçalves, “Evaluating the Understandability of Light Patterns and Pictograms for Autonomous Vehicle-to-Pedestrian Communication Functions,” IEEE Transactions on Intelligent Transportation Systems, IEEE, apr 26 2022.

Jarrraya, L. Degaa, N. Rizoug, M. H. Chabchoub, and H. Trabelsi, “Comparison study between hybrid Nelder-Mead particle swarm optimization and open circuit voltage Recursive least square for the battery parameters estimation,” Journal of Energy Storage, vol. 50, pp. 104424, Elsevier, 2022.

Azouigui, S. Saudrais, B. Barbedette, S. Bordel, S. Delauzun, B. Khatir, C. Neumann, P. Jahn, F. Balembois, and P. Jaillette, “Road Projections: Impact on Road Users and Potential to Enhance Awareness of Backing Situation in Parking Lots,” SAE Technical Paper, no. 2021-01-5078, SAE Technical Paper, jul 28 2021.

Ceschia, T. Azib, O. Bethoux, and F. Alves, “Optimal design methodology for sizing a fuel cell/battery hybrid power source,” Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, vol. 235, no. 1, pp. 3-16, SAGE Publications, 2021.

Durand, A. Mehel, G. Fokoua, F. Murzyn, S. Puech, and F. Larrarte, “Numerical and experimental investigations on brake particle dispersion in the flow generated by a train in an underground station,” Atmospheric Pollution Research, vol. 12, no. 10, pp. 101189, Elsevier, 2021.

Morel, and A. Humeau-Heurtier, “Multiscale permutation entropy for two-dimensional patterns,” Pattern Recognition Letters, vol. 150, pp. 139-146, North-Holland, 2021.

M. Idir, O. Orfila, V. Judalet, B. Sagot, and P. Chatellier, “Mapping Urban Air Quality from Mobile Sensors Using Spatio-Temporal Geostatistics,” Sensors, vol. 21, no. 14, pp. 4717, Multidisciplinary Digital Publishing Institute, 2021.

Yacef, N. Rizoug, L. Degaa, O. Bouhali, and M. Hamerlain, “Energy efficiency path planning for a quadrotor aerial vehicle,” Transactions of the Institute of Measurement and Control, SAGE Publications, nov 22 2021.

M. B. Rahmoune, A. Hafaifa, A. Kouzou, X. Chen, and A. Chaibet, “Gas turbine monitoring using neural network dynamic nonlinear autoregressive with external exogenous input modelling,” Mathematics and Computers in Simulation, vol. 179, pp. 23-47, North-Holland, 2021.

F. Murzyn, C. Sioutas, L. D. Cavellin, F. Joly, A. Baudic, A. Mehel, P. Cuvelier, E. Varea, and B. P. Rouland, “Assessment of air quality in car cabin in and around Paris from on-board measurements and comparison with 2007 data,” Journal of Aerosol Science, pp. 105822, Pergamon, jun 5 2021.

K. M. M. Merghani, B. Sagot, E. Gehin, G. Da, and C. Motzkus, “A review on the applied techniques of exhaled airflow and droplets characterization,” Indoor Air, vol. 31, no. 1, pp. 7-25, 2021.

M. L. Vern, A. Razakamanantsoa, F. Murzyn, F. Larrarte, and V. Cerezo, “Study on a test track of dust resuspension induced by a vehicle,” in Internationnal Transport and Air Pollution Conference 2021, pp. 12p, mar 30 2021.

G. Zang, S. Azouigui, S. Saudrais, O. Peyricot, and M. Hébert, “Quantitative study of vehicle-pedestrian interactions: Towards pedestrian-adapted lighting communication functions for autonomous vehicles,” in Electronic Imaging, vol. 2021, no. 17, pp. 172-1-172-8, Society for Imaging Science and Technology, 2021.

K. Kheira, N. Rizoug, F. Khenfri, and O. Bouhali, “Novel hybrid intelligent controller for chaotic engineering systems,” in Health, Energy Efficiency and Intelligent Building Systems (HEIBS’21), jul 12 2021.

G. Camara, H. Fattachi, N. Rizoug, and C. Larouci, “Multisource on-board energy production and management system dedicated to domestic use thanks to a positive electric energy vehicle concept,” in Health Energy Efficiency and Intelligent Building Systems, HEIBS’2021, jul 12 2021.

A. Mechernene, V. Judalet, A. Chaibet, and M. Boukhnifer, “Lane Change Decision Algorithm based on Risk Prediction and Fuzzy Logic Method,” in 2021 25th International Conference on System Theory, Control and Computing (ICSTCC), pp. 707-713, IEEE, oct 20 2021.

A. Barbier, B. Barbedette, and S. Saudrais, “Early driver-in-the-loop with virtual reality driving simulator in ADAS development methodology,” in ConVRgence (VRIC) Virtual Reality International Conference Proceedings, pp. 22, jul 7 2021.

K. Mahjoub, M. Merghani, B. Sagot, and E. Gehin, “Droplets behavior in a humid jet,” in Health, Energy Efficiency and Intelligent Building Systems (HEIBS’21), jul 12 2021.

A. Benterki, M. Boukhnifer, V. Judalet, and C. Maaoui, “Driving Intention Prediction and State Recognition on Highway,” in 2021 29th Mediterranean Conference on Control and Automation (MED), pp. 566-571, IEEE, jun 22 2021.

M. L. Vern, O. Sediki, A. Razakamanantsoa, F. Murzyn, F. Larrarte, P. Insenga, and P. Gotteland, “Development of a model to quantify dust emissions from truck traffic on earthmoving sites: approach and preliminary results,” in Geo-Environmental Engineering, pp. 8 p, may 20 2021.

M. Biczyski, R. Sehab, G. Krebs, J. Whidborne, and P. Luk, “Designing Low-weight Switched Reluctance Motors for Electric Multirotor Propulsion System,” in More Electric Aircraft 2021, MEA2021, Bordeaux, France, 2021.

L. Degaa, B. Bendjedia, N. Rizoug, A. Saidane, and C. Larouci, “Comparative studies between energy management strategies of fuel cell/battery hybrid energy storage system for light weight electric vehicles,” in Health Energy Efficiency and Intelligent Building Systems, HEIBS’2021, jul 12 2021.

F. Z. Khemili, N. Rizoug, and O. Bouhali, “Balancing of batteries soc in a three phase diode clamped inverter controlled by a direct space vector of line to line voltages,” in Health, Energy Efficiency and Intelligent Building Systems (HEIBS’21), jul 12 2021.

A. Akrad, R. Sehab, and F. Alyoussef, “RMS-based Method for Fault Diagnosis and Fault Detection and Isolation of Current Fault sensor in an Induction Machine.,” in Interanational Conference on Diagnosis and Fault-Tolerant Control, ICDFT’2021, London, United Kingdom, 2021.

G. Zang, S. Azouigui, S. Saudrais, O. Peyricot, and M. Hébert, “Quantitative study of V2P interactions: Towards pedestrian-adapted AV2P communication through the extended signalization,” in SIA VISION, mar 17 2021.

K. Suri, G. Pedroza, and P. Leserf, “Model-Based Approach for Co-optimization of Safety and Security Objectives in Design of Critical Architectures,” in International Conference on Model and Data Engineering, pp. 18-32, Springer, Cham, jun 21 2021.

F. Martinez-Hergueta, T. Q. T. H. R. Delbart, C. Robert, and T. Noble, “Influence of self and external heating on electrical properties of conductive 3D printed filament,” in SAMPE Europe Conference, Zürich, Switzerland, 2021.

Traoré, M. Doumiati, J. Olivier, and C. Morel, “Algorithme de filtrage adaptatif pour la gestion d’énergie d’un véhicule électrique multi-source,” in Symposium de Génie Electrique (SGE) 2021, jul 6 2021.

A. Mehel, “What do we breathe inside our cars? Characterization of the infiltration of pollutants and recommendations,” Field Actions Science Reports. The journal of field actions, no. Special Issue 21, pp. 28-33, Institut Veolia, feb 24 2020.

B. Nagy, E. Geissler, and K. Laszlo, “Room temperature ionic liquids to tailor resorcinol-Formaldehyde polymer gels,” Microporous and Mesoporous Materials, vol. 294, pp. 109888, Elsevier, 2020.

A. Ceschia, T. Azib, O. Bethoux, and F. Alves, “Optimal Sizing of Fuel Cell Hybrid Power Sources with Consideration for Reliability,” Energies, vol. 13, no. 13, pp. 3510, Multidisciplinary Digital Publishing Institute, 2020.

A. Ceschia, T. Azib, O. Bethoux, and F. Alves, “Optimal design methodology for sizing a fuel cell/battery hybrid power source,” Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, SAGE Publications, mar 8 2020.

G. Fokoua, A. Durand, and P. Cuvelier, “Ombroscopic Imaging and PTV to reduce the depth of field in a flow with strong curvature effects,” Optics and Lasers in Engineering, no. 106386, Elsevier, 2020.

M. Biczyski, R. Sehab, J. F. Whidborne, G. Krebs, and P. Luk, “Multirotor Sizing Methodology with Flight Time Estimation,” Journal of Advanced Transportation, vol. 2020, no. Special Issue, pp. 14, Hindawi, 2020.

L. Bekrar, O. Bouhali, Y. Mohammed, and N. Rizoug, “Multi-level svm for six-phase multi-level inverters to drive dual stator induction machine,” International Journal of Power and Energy Systems, vol. 40, no. 2, 2020.

M. Mcharek, T. Azib, M. Hammadi, C. Larouci, and J. Choley, “Multidisciplinary design optimization using knowledge management applied to an electronic throttle,” COMPEL-The international journal for computation and mathematics in electrical and electronic engineering, Emerald Publishing Limited, 2020.

V. Jesudhas, R. Balachandar, H. Wang, and F. Murzyn, “Modelling hydraulic jumps: IDDES versus experiments,” Environmental Fluid Mechanics, pp. 1-21, Springer Netherlands, 2020.

H. Assem, T. Azib, F. Bouchafaa, A. H. Arab, and C. Laarouci, “Limits control and energy saturation management for DC bus regulation in photovoltaic systems with battery storage,” Solar Energy, vol. 211, pp. 1301-1310, Pergamon, nov 15 2020.

J. Meng, M. Boukhnifer, C. Delpha, and D. Diallo, “Incipient short-circuit fault diagnosis of lithium-ion batteries,” Journal of Energy Storage, vol. 31, pp. 101658, Elsevier, 2020.

M. B. Rahmoune, A. Hafaifa, K. Abdellah, X. Chen, and A. Chaibet, “Gas turbine monitoring using neural network dynamic nonlinear autoregressive with external exogenous input modelling,” Mathematics and Computers in Simulation, North-Holland, jul 24 2020.

E. Pierre, S. Rabia, K. Guillaume, and B. Bertrand, “Force Fight and Its Elimination in a Prototype of a Redundant Direct-Drive Avionic Actuator,” Journal of Applied Sciences 2020/11, vol. 10, no. 23, pp. 8492, Multidisciplinary Digital Publishing Institute, 2020.

M. L. Vern, O. Sediki, A. Razakamanantsoa, F. Murzyn, and F. Larrarte, “Experimental study of particle lift initiation on roller-compacted sand-clay mixtures,” Environmental Geotechnics, pp. 1-12, Thomas Telford Ltd, feb 12 2020.

A. Chaibet, M. Boukhnifer, N. Ouddah, and E. Monmasson, “Experimental Sensorless Control of Switched Reluctance Motor for Electrical Powertrain System,” Energies, vol. 13, no. 12, pp. 3081, Multidisciplinary Digital Publishing Institute, 2020.

M. L. Vern, O. Sediki, A. Razakamanantsoa, F. Murzyn, and F. Larrarte, “Experimental assessment of dust emissions on compacted soils degraded by traffic,” Atmosphere, vol. 11, no. 4, pp. 369, Multidisciplinary Digital Publishing Institute, 2020.

B. Bendjedia, N. Rizoug, M. Boukhnifer, and L. Degaa, “Energy management strategies for a fuel-cell/battery hybrid power system,” Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, SAGE Publications, oct 2 2020.

F. Yacef, N. Rizoug, and L. Degaa, “Energy-Efficiency Path Planning for Quadrotor UAV Under Wind Conditions,” arXiv preprint arXiv:2004.00182, 2020.

F. Khenfri, K. Chaaban, and M. Chetto, “Efficient mapping of runnables to tasks for embedded AUTOSAR applications,” Journal of Systems Architecture, pp. 101800, North-Holland, may 30 2020.

Y. Bello, T. Azib, C. Larouci, M. Boukhnifer, N. Rizoug, D. Patino, and F. Ruiz, “Eco-Driving Optimal Controller for Autonomy Tracking of Two-Wheel Electric Vehicles,” Journal of Advanced Transportation, vol. 2020, Hindawi, feb 19 2020.

R. Rodriguez, F. Murzyn, A. Mehel, and F. Larrarte, “Dispersion of ultrafine particles in the wake of car models: A wind tunnel study,” Journal of Wind Engineering and Industrial Aerodynamics, vol. 198, pp. 104109, Elsevier, 2020.

F. Murzyn, G. Fokoua, R. Rodriguez, C. Shen, F. Larrarte, and A. Mehel, “Car Wake Flows and Ultrafine Particle Dispersion: From Experiments to Modelling,” Atmosphere, vol. 11, no. 1, pp. 39, Multidisciplinary Digital Publishing Institute, 2020.

A. Benterki, M. Boukhnifer, V. Judalet, and C. Maaoui, “Artificial intelligence for vehicle behavior anticipation: Hybrid approach based on maneuver classification and trajectory prediction,” IEEE Access, vol. 8, pp. 56992-57002, IEEE, mar 20 2020.

J. Meng, M. Boukhnifer, D. Diallo, and T. Wang, “A new cascaded framework for lithium-ion battery state and parameter estimation,” Applied Sciences, vol. 10, no. 3, pp. 1009, Multidisciplinary Digital Publishing Institute, 2020.

T. Mesbahi, P. Bartholomeus, N. Rizoug, R. Sadoun, F. Khenfri, and P. Lemoigne, “Advanced Model of Hybrid Energy Storage System Integrating Lithium-ion Battery and Supercapacitor For Electric Vehicle Applications,” IEEE Transactions on Industrial Electronics, IEEE, apr 15 2020.

C. Blanchard, R. Balachandar, and F. Murzyn, “Study of the interactions between tailpipe exhaust flow and ahmed body wake,” in ASTFE Digital Library, Begel House Inc., 2020.

J. Meng, M. Boukhnifer, D. Diallo, and T. Wang, “Short-Circuit Fault Diagnosis and State Estimation for Li-ion Battery using Weighting Function Self-Regulating Observer,” in 2020 Prognostics and Health Management Conference (PHM-Besançon), pp. 15-20, IEEE, may 4 2020.

A. Mechernene, V. Judalet, A. Chaibet, and M. Boukhnifer, “Risk Analysis Method for a Lane Change Maneuvers on Highways,” in 2020 International Conference on Control, Automation and Diagnosis (ICCAD), pp. 1-7, IEEE, oct 7 2020.

B. Bendjedia, N. Rizoug, and M. Boukhnifer, “Real Time Implementation of Frequency Separation Management Strategy of Hybrid Source for Fuel Cell Electric Vehicle Applications,” in 2020 IEEE 14th International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG), vol. 1, pp. 544-549, IEEE, jul 8 2020.

K. Menfoukh, M. M. Touba, F. Khenfri, and L. Guettal, “Optimized Convolutional Neural Network architecture for UAV navigation within unstructured trail,” in IEEE International conference on Communications, Control Systems and Signal Processing (CCSSP2020), El-Oued – Algeria, mar 16 2020.

A. Meddour, N. Rizoug, A. Babin, and L. Degaa, “Optimization of Li-ion modelling for automotive application: comparison of optimization methods performances,” in 2020 7th International Conference on Control, Decision and Information Technologies (CoDIT), vol. 1, pp. 1117-1122, IEEE, jun 29 2020.

K. Kahili, O. Bouhali, F. Khenfri, and N. Rizoug, “Novel Hybrid Intelligent Backstepping Controller for Chaotic Systems,” in 2020 7th International Conference on Control, Decision and Information Technologies (CoDIT), vol. 1, pp. 1185-1190, IEEE, jun 29 2020.

B. Traoré, M. Doumiati, C. Morel, J. Olivier, and O. Soumaoro, “New energy management algorithm based on filtering for electrical losses minimization in Battery-Ultracapacitor electric vehicles,” in 2020 22nd European Conference on Power Electronics and Applications (EPE’20 ECCE Europe), pp. P. 1-P. 7, IEEE, sep 7 2020.

A. Benterki, V. Judalet, C. Maaoui, and M. Boukhnifer, “Multi-Model and Learning-Based Framework for Real-Time Trajectory Prediction,” in 2020 28th Mediterranean Conference on Control and Automation (MED), pp. 776-781, IEEE, sep 15 2020.

H. Assem, F. Bouchafaa, T. Azib, N. Allam, and N. Belhaouas, “MPPT Charge Regulator and Monitor for Photovoltaic/Battery System Based on Microcontroller,” in International Conference in Artificial Intelligence in Renewable Energetic Systems, pp. 114-124, Springer, Cham, dec 22 2020.

D. R., B. Toth, F. Martinez-Hergueta, and T. Q. T. Hoang, “Mechanical response of structural 3D printed polymers: an experimental and numerical study,” in SAMPE Europe Conference, Amsterdam, 2020.

J. Meng, M. Boukhnifer, and D. Diallo, “Lithium-Ion Battery Monitoring and Observability Analysis with Extended Equivalent Circuit Model,” in 2020 28th Mediterranean Conference on Control and Automation (MED), pp. 764-769, IEEE, sep 15 2020.

B. Bendedia, S. Mahdjoubi, L. Degaa, and N. Rizoug, “Improved Fuzzy Logic Control of PV/Battery Hybrid Power System,” in 2020 7th International Conference on Control, Decision and Information Technologies (CoDIT), vol. 1, pp. 1231-1237, IEEE, jun 29 2020.

D. Ouamara, M. Boukhnifer, A. Chaibet, A. Maidi, A. Sava, and K. Adjallah, “Fault Detection and Isolation Current Sensor of Electrical Powertrain System,” in 2020 International Conference on Control, Automation and Diagnosis (ICCAD), pp. 1-6, IEEE, oct 7 2020.

C. Shen, F. Murzyn, and G. Fokoua, “Experimental study of the interaction between two vehicles: the effect of the inter-vehicle distance on the recirculation zone,” in ASTFE Digital Library, Begel House Inc., 2020.

B. Traoré, M. Doumiati, C. Morel, J. Olivier, and O. Soumaoro, “Energy Management Strategy Based on a New Adaptive Filtering Algorithm for Battery-Ultracapacitor Electric Vehicles,” in 2020 15th IEEE Conference on Industrial Electronics and Applications (ICIEA), pp. 392-396, IEEE, nov 9 2020.

L. Degaa, B. Bendjedia, N. Rizoug, A. Saidane, and A. Belaidi, “Comparative study between different energy storage technologies to design hybrid source supplying urban electric vehicles,” in 2020 3rd International Conference on Computer Applications and Information Security (ICCAIS), pp. 1-6, IEEE, mar 19 2020.

F. Z. Khemili, N. Rizoug, O. Bouhali, B. Benjdaia, and M. Lefouili, “Balancing of State Of Charge Batteries in a Three Phase Diode Clamped Inverter Controlled By a Direct Space Vector of Line to Line Voltages,” in 2020 7th International Conference on Control, Decision and Information Technologies (CoDIT), vol. 1, pp. 1156-1161, IEEE, jun 29 2020.

K. Chaaban, F. Khenfri, and M. Chetto, “Automation of Runnable to task mapping configuration of an AUTOSAR-based software,” in International Conference on Computer and Information Sciences (2020 ICCIS), Juf, Saudi Arabia, 2020.

M. M. E. Idi, M. Karkri, M. Tankari, C. Larouci, T. Azib, and G. Levebre, “Caractérisation du comportement thermique des batteries Li-ion en vue d’une gestion optimale passive,” in Congrès Annuel de la Société Française de Thermique 2020, jul 9 2020.

M. R. Boukhari, A. Chaibet, M. Boukhnifer, and S. Glaser, “Two longitudinal fault tolerant control architectures for an autonomous vehicle,” Mathematics and Computers in Simulation, vol. 156, pp. 236-253, North-Holland, 2019.

Y. Rkhissi-Kammoun, J. Ghommam, M. Boukhnifer, and F. Mnif, “Two current sensor fault detection and isolation schemes for induction motor drives using algebraic estimation approach,” Mathematics and Computers in Simulation, vol. 157, pp. 39-62, North-Holland, 2019.

P. Leserf, P. D. Saqui-Sannes, and J. Hugues, “Trade-off analysis for SysML models using decision points and CSPs,” Software and Systems Modeling, vol. 18, no. 6, pp. 3265-3281, Springer Berlin Heidelberg, 2019.

M. Haggui, A. E. Mahi, Z. Jendli, A. Akrout, and M. Haddar, “Static and fatigue characterization of flax fiber reinforced thermoplastic composites by acoustic emission,” Applied acoustics, vol. 147, pp. 100-110, Elsevier, 2019.

L. Degaa, N. Rizoug, B. Bendjedia, A. Saidane, and C. Larouci, “Sizing improvement of hybrid storage system composed with high energy and high power Li-ion batteries for automotive applications,” Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, vol. 233, no. 7, pp. 870-876, SAGE Publications, 2019.

A. Monti, A. E. Mahi, Z. Jendli, and L. Guillaumat, “Quasi-static and fatigue properties of a balsa cored sandwich structure with thermoplastic skins reinforced by flax fibres,” Journal of Sandwich Structures and Materials, vol. 21, no. 7, pp. 2358-2381, SAGE Publications, 2019.

N. Keita, A. Mehel, F. Murzyn, A. Taniere, B. Arcen, and B. Diourte, “Numerical study of ultrafine particles dispersion in the wake of a cylinder,” Atmospheric Pollution Research, vol. 10, no. 1, pp. 294-302, Elsevier, 2019.

M. Mcharek, T. Azib, M. Hammadi, C. Larouci, and J. Choley, “Multiphysical Design Approach for Automotive Electronic Throttle Body,” IEEE Transactions on Industrial Electronics, vol. 67, no. 8, pp. 6752-6761, IEEE, sep 12 2019.

Y. Lebaupin, T. T. Hoang, M. Chauvin, and F. Touchard, “Influence of the stacking sequence on the low-energy impact resistance of flax/PA11 composite,” Journal of Composite Materials, SAGE Publications, mar 16 2019.

K. Kahili, O. Bouhali, N. Rizoug, and F. Khenfri, “Hybrid FS-WNN approximator in indirect adaptive control of uncertain non-linear MIMO systems,” IET Control Theory and Applications, vol. 14, no. 4, pp. 539-548, IET Digital Library, nov 7 2019.

M. R. Boukhari, A. Chaibet, M. Boukhnifer, and S. Glaser, “Exteroceptive Fault-tolerant Control for Autonomous and Safe Driving,” Automation Challenges of Socio-technical Systems, pp. 151-178, John Wiley and Sons, Inc., jul 15 2019.

F. Amenini, J. Brocail, M. Chauvin, and S. Thuillier, “Dynamical properties of flax fibre reinforced PA11 over a large frequency range,” Composites Science and Technology, vol. 171, pp. 234-243, Elsevier, feb 8 2019.

F. Ablitzer, C. Pézerat, B. Lascoup, and J. Brocail, “Corrigendum to” Identification of the flexural stiffness parameters of an orthotropic plate from the local dynamic equilibrium without a priori knowledge of the principal …,” JSV, vol. 438, pp. 382-382, 2019.

J. Meng, M. Boukhnifer, and D. Diallo, “Comparative study of lithium-ion battery open-circuit-voltage online estimation methods,” IET Electrical Systems in Transportation, vol. 10, no. 2, pp. 162-169, IET Digital Library, oct 18 2019.

M. Mcharek, M. Hammadi, T. Azib, C. Larouci, and J. Choley, “Collaborative design process and product knowledge methodology for mechatronic systems,” Computers in Industry, vol. 105, pp. 213-228, Elsevier, 2019.

A. Mehel, and E. Rolin, “Wind tunnel study of ultrafine particles infiltrating car cabin,” in 23rd International Transport and Air Pollution, 2019.

L. Degaa, N. Rizoug, B. Bendjedia, A. Saidane, C. Larouci, and A. Belaidi, “Using of multi-physical models to evaluate the Influence of power management strategies on the ageing of hybrid energy storage system,” in 2019 6th International Conference on Control, Decision and Information Technologies (CoDIT), pp. 2052-2057, IEEE, apr 23 2019.

E. Tournon, P. Venet, B. Barbedette, A. Lelievre, J. Aubry, and A. Sari, “Unplugged Series Hybrid Bike Study: Cost versus Performance Analysis,” in 2019 IEEE Vehicle Power and Propulsion Conference (VPPC), pp. 1-6, IEEE, oct 14 2019.

R. Rodriguez, F. Murzyn, A. Méhel, and F. Larrarte, “Ultrafine particle dispersion in the wake of a squareback vehicle model,” in 23rd Transport and Air Pollution Conference, Thessaloniki 2019, 2019.

Y. Bello, T. Azib, C. Larouci, M. Boukhnifer, N. Rizoug, D. Patino, and F. Ruiz, “Two wheels electric vehicle modelling: parameters sensitivity analysis,” in 2019 6th International Conference on Control, Decision and Information Technologies (CoDIT), pp. 279-284, IEEE, apr 23 2019.

Y. Bello, T. Azib, C. Larouci, M. Boukhnifer, N. Rizoug, D. Patiño, and F. Ruiz, “Thermal Impact on Powertrain Efficiency Improvement for Two Wheels Electric Vehicle,” in IECON 2019-45th Annual Conference of the IEEE Industrial Electronics Society, vol. 1, pp. 2744-2750, IEEE, oct 14 2019.

A. Ceschia, T. Azib, O. Bethoux, and F. Alves, “Sensitivity Analysis of an Optimal Design Methodology for Hybrid Power System,” in IEEE Codit Conference on Control, Decision and Information Technologies,, 2019.

K. Kahili, O. Bouhali, F. Khenfri, and N. Rizoug, “Robust Intelligent Self-tuning PID Controller for the Body-rate Stabilization of Quadrotors,” in IECON 2019-45th Annual Conference of the IEEE Industrial Electronics Society, vol. 1, pp. 5281-5286, IEEE, oct 14 2019.

G. P. H. Hongyi1, S. Azouigui2, R. Sehab1, M. Boukhnifer, F. Balembois, F. Bedu, O. Cayol, and K. Beev, “Remote sensing techniques to recognize road surface conditions for autonomous vehicles H.,” in SIA VISION International Congress, Paris France March, 2021, apr 7 2019.

A. Benterki, M. Boukhnifer, V. Judalet, and M. Choubeila, “Prediction of surrounding vehicles lane change intention using machine learning,” in 2019 10th IEEE International Conference on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications (IDAACS), vol. 2, pp. 839-843, IEEE, sep 18 2019.

J. Meng, M. Boukhnifer, and D. Diallo, “On-line Model-based Short Circuit Diagnosis of Lithium-Ion Batteries for Electric Vehicle Application,” in IECON 2019-45th Annual Conference of the IEEE Industrial Electronics Society, vol. 1, pp. 6022-6027, IEEE, oct 14 2019.

A. Durand, A. Mehel, F. Murzyn, S. Puech, and F. Larrarte, “Numerical study of particle dispersion emitted from train brakes in underground station,” in 23rd Transport and Air Pollution Conference, Thessaloniki 2019, 2019.

J. W. T. Q. T. Hoang, “Low-energy impact of smart composite materials,” in BRAIA Scholars’Workshop, 2019.

A. Benterki, V. Judalet, M. Choubeila, and M. Boukhnifer, “Long-Term Prediction of Vehicle Trajectory Using Recurrent Neural Networks,” in IECON 2019-45th Annual Conference of the IEEE Industrial Electronics Society, vol. 1, pp. 3817-3822, IEEE, oct 14 2019.

A. Maouloud, M. Boukhnifer, C. Larouci, H. Maanane, and F. Simon, “Implementation and Experimental Validation of Robust Numerical Control for DC-DC Buck Converter,” in 2019 6th International Conference on Control, Decision and Information Technologies (CoDIT), pp. 912-917, IEEE, apr 23 2019.

M. Arrigoni, J. C. Walrick, and G. Jago, “Impact of soft projectiles on rigid targets: modelling and impact pressure measurement attempt,” in CFM 2019 Brest, 2019.

E. Tournon, P. Venet, B. Barbedette, A. Lelievre, J. Aubry, and S. Ali, “Efficiency Comparison between Series Hybrid Bike and Traditional Bike,” in 2019 Fourteenth International Conference on Ecological Vehicles and Renewable Energies (EVER), pp. 1-7, IEEE, may 8 2019.

T. Vogel, J. C. Walrick, and P. Casari, “Composite laminate with embedded electric cables submitted to low energy impact,” in CFM 2019 Brest, 2019.

M. Mcharek, T. Azib, C. Larouci, and M. Hammadi, “Collaboration and multidisciplinary design optimization for mechatronic systems,” in IECON 2019-45th Annual Conference of the IEEE Industrial Electronics Society, vol. 1, pp. 624-629, IEEE, oct 14 2019.

A. Durand, A. Mehel, F. Murzyn, S. Puech, and F. Larrarte, “CFD study of dispersion of particles generated by mechanical braking: application to trains in underground stations,” in WCRR2019, 12th World Congress on Railway Research, 2019.

R. Lienhart, V. Jesudhas, R. Balachandar, R. Barron, R. Rodriguez, and F. Murzyn, “Cfd study of flow around ahmed body,” in 4th Thermal and Fluids Engineering Conference (TFEC), 2019.

B. Anthony, R. Nassim, B. David, H. Zouheir, and L. Cherif, “Battery sizing impact on aging of high capacity LFP/C cell for electrical-Light Commercial Vehicle,” in IECON 2019-45th Annual Conference of the IEEE Industrial Electronics Society, vol. 1, pp. 2324-2329, IEEE, oct 14 2019.

J. Meng, M. Boukhnifer, and D. Diallo, “A new model-based lithium-ion battery online monitoring structure,” in 2019 Prognostics and system health management conference (PHM-Paris), pp. 24-29, IEEE, may 2 2019.

Y. Saadi, R. Sehab, A. Chaibet, M. Boukhniffer, and D. Diallo, “An Automatic Fault Detection and Localization Strategy for Siwitched Reluctance Machine Open Circuit for Electric Vehicle Applications,” in International Conference on Control, Automation and Diagnosis ( IEEE ICCAD’2019), apr 7 2019.

J. Meng, M. Boukhnifer, and D. Diallo, “A comparative study of open-circuit-voltage estimation algorithms for lithium-ion batteries in battery management systems,” in 2019 6th International Conference on Control, Decision and Information Technologies (CoDIT), pp. 30-35, IEEE, apr 23 2019

B. Sagot, and D. L. Dur, “Application du concept d’impaction virtuelle à la filtration,” in Congrès Français Sur Les Aérosols, 2019.

M. Mcharek, T. Azib, M. Hammadi, J. yves Choley, and C. Larouci, “Knowledge sharing for mechatronic systems design and optimization,” IFAC-PapersOnLine, vol. 51, no. 11, pp. 1365-1370, 2018.

B. Bendjedia, N. Rizoug, M. Boukhnifer, F. Bouchafaa, and M. Benbouzid, “Influence of secondary source technologies and energy management strategies on energy storage system sizing for fuel cell electric vehicles,” International Journal of Hydrogen Energy, vol. 43, no. 25, pp. 11614-11628, 2018.

C. Latrech, A. Chaibet, M. Boukhnifer, and S. Glaser, “Integrated longitudinal and lateral networked control system design for vehicle platooning,” Sensors, vol. 18, no. 9, p. 3085, 2018.

M. Boukhari, A. Chaibet, M. Boukhnifer, and S. Glaser, “Proprioceptive sensors’ fault tolerant control strategy for an autonomous vehicle,” Sensors, vol. 18, no. 6, p. 1893, 2018.

B. Nail, A. Kouzou, A. Hafaifa, and A. Chaibet, “Parametric identification and stabilization of turbo-compressor plant based on matrix fraction description using experimental data,” Journal of Engineering Science and Technology, vol. 13, no. 6, pp. 1850-1868, 2018.

N. Hadroug, A. Hafaifa, N. Batel, A. Kouzou, and A. Chaibet, “Active fault tolerant control based on a neuro fuzzy inference system applied to a two shafts gas turbine,” Applied Artificial Intelligence, vol. 32, no. 6, pp. 515-540, 2018.

V. Judalet, S. Glaser, D. Gruyer, and S. Mammar, “Fault detection and isolation via the interacting multiple model approach applied to drive-by-wire vehicles,” Sensors, vol. 18, no. 7, p. 2332, 2018.

T. Mesbahi, N. Rizoug, P. Bartholomeüs, R. Sadoun, F. Khenfri, and P. L. Moigne, “Dynamic model of li-ion batteries incorporating electrothermal and ageing aspects for electric vehicle applications,” IEEE Transactions on industrial electronics, vol. 65, no. 2, pp. 1298-1305, 2018.

N. Rizoug, T. Mesbahi, R. Sadoun, P. Bartholomeüs, and P. L. Moigne, “Development of new improved energy management strategies for electric vehicle battery/ supercapacitor hybrid energy storage system,” Energy Efficiency, vol. 11, no. 4, pp. 823-843, 2018.

H. Alloui, F. Khoucha, N. Rizoug, M. Benbouzid, and A. Kheloui, “An improved rule- and frequency separation-based energy management strategy for a fuel cell electric vehicle,” International Journal on Energy Conversion (IRECON), vol. 6, no. 1, 2018.

S. Zouari, J. Brocail, and J. m Génevaux, “Flexural wave band gaps in metamaterial plates: A numerical and experimental study from infinite to finite models,” Journal of Sound and Vibration, vol. 435, pp. 246-263, nov 24 2018.

A. Monti, A. E. Mahi, Z. Jendli, and L. Guillaumat, “Quasi-static and fatigue properties of a balsa cored sandwich structure with thermoplastic skins reinforced by flax fibres,” Journal of Sandwich Structures and Materials, 2018.

R. Rodriguez, F. Murzyn, J. Aubry, A. Mehel, and F. Larrarte, “An innovative ldv data processing method for statistical error corrections. application to homogeneous and nonhomogeneous seeding,” Flow Measurement and Instrumentation, vol. 60, pp. 67-77, 2018.

M. Tientcheunsiewe, D. Tcheukam-toko, F. Murzyn, P. rouland B, A. Monkam, and M. Tchawe-tchawe, “Numerical study of a kinetic detachment flow in the nearwake of an ahmed body,” MOJ Civil Engineering, vol. 4, no. 3, pp. 171-173, 2018.

A. Ceschia, T. Azib, O. Bethoux, and F. Alves, “Optimal design of fuel cell hybrid power source under energy constraint,” in IEEE Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles (ESARS) and International Transportation Electrification Conference (ITEC), 2018.

M. Mcharek, T. Azib, M. Hammadi, C. Larouci, and J. yves Chloey, “Validation approach of a mechatronic system controller in upstream phase,” in 2018 12th France-Japan and 10th Europe-Asia Congress on Mechatronics, pp. 212-216, IEEE, 2018.

H. Soubra and T. Azib, “Functional size measurement for energy needs early estimation in autonomous drones,” in IWSM, 2018.

Y. Rkhissi-kammoun, J. Ghommam, M. Boukhnifer, and F. Mnif, “Current sensor faulttolerant control scheme for induction machine in electric vehicle applications using risealgebraic estimation approach,” in 2018 IEEE International Conference on Industrial Technology (ICIT), pp. 358-363, IEEE, 2018.

Y. Rkhissi-kammoun, J. Ghommam, M. Boukhnifer, and F. Mnif, “New fault-tolerant induction motor control architecture for current sensor fault in electric vehicle,” in 2018 15th International Multi-Conference on Systems, Signals and Devices (SSD), pp. 65-70, IEEE, 2018.

C. Latrech, A. Chaibet, M. Boukhnifer, and S. Glaser, “Decentralized observer-based fuzzy control for interconnected networked control systems with quantization and random packets dropout,” in 2018 IEEE International Conference on Industrial Technology (ICIT), pp. 135-140, IEEE, 2018.

M. R. Boukhari, A. Chaibet, M. Boukhnifer, and S. Glaser, “Voting algorithm approach for autonomous vehicle safe driving,” in 2018 IEEE International Conference on Industrial Technology (ICIT), pp. 327-332, IEEE, 2018.

Y. Saadi, R. Sehab, A. Chaibet, M. Boukhnifer, and D. Diallo, “Sensorless control of switched reluctance motor for ev application using a sliding mode observer with unknown inputs,” in 2018 IEEE International Conference on Industrial Technology (ICIT), pp. 516-521, IEEE, 2018.

H. Bagua, M. Guemana, A. Hafaifa, and A. Chaibet, “Gas turbine monitoring using fuzzy control approaches: Comparison between fuzzy type 1 and 2,” in 2018 International Conference on Applied Smart Systems (ICASS), pp. 1-6, IEEE, nov 24 2018.

Y. Saadi, R. Sehab, A. Chaibet, M. Boukhnifer, and D. Diallo, “Sensorless control of switched reluctance motor with unknown load torque for ev application using extended kalman filter and second order sliding mode observer,” in 2018 IEEE International Conference on Industrial Technology (ICIT), pp. 522-528, IEEE, 2018.

H. Mhanna, P. Leserf, and S. Saudrais, “Generation of context-based usage scenario test from uml sequence diagrams,” in 2018 IEEE/ACS 15th International Conference on Computer Systems and Applications (AICCSA), pp. 1-7, IEEE, oct 28 2018.

L. Degaa, B. Bendjedia, N. Rizoug, and A. Saidane, “Energy secondary source technology effect on hybrid energy source sizing for automotive applications,” in 2018 5th International Conference on Control, Decision and Information Technologies (CoDIT), pp. 1040-1044, IEEE, 2018.

K. Kahili, O. Bouhali, and N. Rizoug, “Wavelet functions performances in intelligent direct adaptive control of uncertain nonlinear systems,” in 2018 International Conference on Electrical Sciences and Technologies in Maghreb (CISTEM), pp. 1-6, IEEE, oct 28 2018.

F. Yacef, N. Rizoug, L. Degaa, O. Bouhali, and M. Hamerlain, “Extended state observerbased adaptive fuzzy tracking control for a quadrotor uav,” in 2018 5th International Conference on Control, Decision and Information Technologies (CoDIT), pp. 1023-1028, IEEE, 2018.

P. J. S. Azouigui, B. Khatir, S. Saudrais, B. Barbedette, S. Bordel, and C. Neumann, “Advanced lighting functions using road projection,” in Vision Congress, 2018.

M. Haggui, A. Elmahi, Z. Jendli, A. Akrout, and M. Haddar, “Damage characterization of flax fibre composite using linear and nonlinear vibration resonant techniques,” in 26th Annual International Conference on Composites or Nano Engineering, ICCE-26, 2018.

L. Guillaumat, S. Terekhina, I. Derbali, A. Monti, A. E. Mahi, and Z. Jendli, “Flax fibers reinforced thermoplastic resin based biocomposites, a future for sustainable composite parts,” in MATEC Web of Conferences, vol. 203, p. 06019, EDP Sciences, 2018.

V. Jesudhas, F. Murzyn, and R. Balachandar, “Iddes evaluation of oscillating hydraulic jumps,” in E3S Web of Conferences, vol. 40, p. 05067, EDP Sciences, 2018.

B. Sagot, L. Chazalon, and L. A. A. Yahia, “Influence of design parameters and operating conditions on the aerosol produced by a laskin nozzle,” in 10th International Aerosol Conference, St. Louis, Missouri, 2018.

B. Sagot, L. Chazalon, and L. A. A. Yahia, “Design of a laskin aerosol generator for submicron collection efficiency measurements of blow-by filters,” in Fluid particle separation, Lyon, France, 2018.

B. Sagot and D. L. Dur, “Use of the virtual impactor concept for high owrate filtration applications,” in Fluid particle separation, Lyon, France, 2018.

T. Q. T. Hoang, Y. Lebaupin, M. Chauvin, and F. Touchard, “Low-velocity impact of flax fiber reinforced polymer composites,” in International Symposium on Dynamic Response and Failure of Composite Materials, 2018.

H. Assem, T. Azib, F. Bouchafaa, C. Larouci, and A. H. Arab, “Stratégie de gestion d’énergie dans une station de charge à énergie solaire photovoltaïque,” Revue des Energies Renouvelables, vol. 21, no. 3, pp. 365-371, 2018.

R. Rodriguez, D. Balou, E. Varea, F. Murzyn, A. Mehel, B. Patte-rouland, and F. Larrarte, “Correction des erreurs statistiques aléatoire et sysématique par une nouvelle méthode de traitement ldv. application aux écoulements de sillage du corps d’ahmed,” in 16ème Congrès Francophone de Techniques Laser pour la mécanique des fluides, 2018.

B. Sagot and L. Chazalon, “Influence des paramétres opératoires et géométriques d’une buse laskin sur la production d’un brouillard d’huile,” in Congrès Français sur les Aérosols, 2018.

A. Babin, N. Rizoug, T. Mesbahi, D. Boscher, Z. Hamdoun, and C. Larouci, “Total cost of ownership improvement of commercial electric vehicles using battery sizing and intelligent charge method,” IEEE Transactions on Industry Applications, vol. 54, pp. 1691-1700, dec 21 2017.

B. Bendjedia, N. Rizoug, M. Boukhnifer, and F. Bouchafaa, “Hybrid fuel cell/battery source sizing and energy management for automotive applications,” IFAC- apersOnLine, vol. 50, no. 1, pp. 4745-4750, 2017.

Y. Rkhissi-kammoun, J. Ghommam, M. Boukhnifer, and F. Mnif, “Rise-backstepping based robust control design for induction motor drives,” COMPEL-The international journal for computation and mathematics in electrical and electronic engineering, vol. 36, no. 4, pp. 906-937, 2017.

M. R. Boukhari, A. Chaibet, M. Boukhnifer, and S. Glaser, “Fault-tolerant control for lipschitz nonlinear systems: Vehicle inter-distance control application,” IFAC-PapersOnLine, vol. 50, no. 1, pp. 14248-14253, 2017.

M. R. Boukhari, A. Chaibet, M. Boukhnifer, and S. Glaser, “A review on fault-tolerant control for vehicle dynamics,” International Journal of Digital Signals and Smart Systems, vol. 1, no. 3, pp. 181-203, 2017.

M. Boukhnifer, A. Chaibet, N. Ouddah, and E. Monmasson, “Speed robust design of switched reluctance motor for electric vehicle system,” Advances in Mechanical Engineering, vol. 9, no. 11, 2017.

B. Bendjedia, N. Rizoug, M. Boukhnifer, and F. Bouchafaa, “Improved energy management strategy for a hybrid fuel cell/battery system: Simulation and experimental results,” COMPEL-The international journal for computation and mathematics in electrical and electronic engineering, vol. 36, no. 4, pp. 1008-1027, 2017.

A. Raisemche, A. Chaibet, M. Boukhnifer, and D. Diallo, “A speed sensor fault tolerant control for electrical vehicle system,” International Journal of Digital Signals and Smart Systems, vol. 1, no. 4, pp. 323-335, 2017.

N. Hadroug, A. Hafaifa, A. Kouzou, and A. Chaibet, “Dynamic model linearization of two shafts gas turbine via their input/output data around the equilibrium points,” Energy, vol. 120, pp. 488-497, 2017.

B. Nail, A. Kouzou, A. Hafaifa, and A. Chaibet, “Power plant system identification based on extended least square kronecker operator,” Journal of the Technical University-Sofia Plovdiv Branch, Bulgaria Fundamental Sciences and Applications, vol. 23, pp. 15-20, 2017.

N. Hadroug, A. Hafaifa, M. Guemana, A. Kouzou, A. Salam, and A. Chaibet, “Heavy duty gas turbine monitoring based on adaptive neuro-fuzzy inference system: speed and exhaust temperature control,” Mathematics-in-Industry Case Studies, vol. 8, no. 1, p. 8, 2017.

T. Mesbahi, N. Rizoug, P. Bartholomeüs, R. Sadoun, F. Khenfri, and P. L. Moigne, “Optimal energy management for a li-ion battery/supercapacitor hybrid energy storage system based on a particle swarm optimization incorporating neldermead simplex approach,” IEEE Transactions on Intelligent Vehicles, vol. 2, no. 2, pp. 99-110, 2017.

T. Mesbahi, N. Rizoug, P. Bartholomeüs, R. Sadoun, F. Khenfri, and P. L. Moigne, “Dynamic model of li-ion batteries incorporating electrothermal and ageing aspects for electric vehicle applications,” IEEE Transactions on industrial electronics, vol. 65, no. 2, pp. 1298-1305, 2017.

N. Rizoug, R. Sadoun, T. Mesbahi, P. Bartholumeüs, and P. Lemoigne, “Aging of high power li-ion cells during real use of electric vehicles,” IET Electrical Systems in Transportation, vol. 7, no. 1, pp. 14-22, 2017.

N. Bedrici, M. B. Tahar, and P. Gatignol, “A fourier integral-boundary element method applied to the scattering of a beam by defect under an interface,” Acta Acustica united with Acustica, vol. 103, no. 2, pp. 200-209, 2017.

F. Ablitzer, C. Pézerat, B. Lascoup, and J. Brocail, “Identification of the flexural stiffness parameters of an orthotropic plate from the local dynamic equilibrium without a priori knowledge of the principal directions,” Journal of Sound and Vibration, vol. 404, pp. 31-46, 2017.

S. Zouari, J. michel Genevaux, J. Brocail, and F. Ablitzer, “Band gap formation in thin plates with a periodic array of resonators,” Mechanics and Industry, vol. 18, no. 3, p. 304, 2017.

Y. Lebaupin, M. Chauvin, T. quynh Truong Hoang, F. Touchard, and A. Beigbeder, “Influence of constituents and process parameters on mechanical properties of flax fibrere inforced polyamide 11 composite,” Journal of Thermoplastic Composite Materials, vol. 30, no. 11, pp. 1503-1521, 2017.

A. Monti, A. E. Mahi, Z. Jendli, and L. Guillaumat, “Experimental and finite elements analysis of the vibration behaviour of a bio-based composite sandwich beam,” Composites Part B: Engineering, vol. 110, pp. 466-475, 2017.

F. Murzyn and R. R. A. Mehel, “The interactions of the exhaust ultrafine particle with the vehicle near wake flow,” Journal of Earth Sciences and Geotechnical Engineering, vol. 7, no. 1, pp. 215-230, 2017.

H. Wang and F. Murzyn, “Experimental assessment of characteristic turbulent scales in two-phase flow of hydraulic jump: from bottom to free surface,” Environmental Fluid Mechanics, vol. 17, no. 1, pp. 7-25, 2017.

B. Sagot, A. Forthomme, L. A. A. Yahia, and G. D. L. Bourdonnaye, “Experimental study of cyclone performance for blow-by gas cleaning applications,” Journal of Aerosol Science, vol. 110, pp. 53-69, 2017.

L. A. A. Yahia, E. Gehin, and B. Sagot, “Application of the thermophoretic annular precipitator (trap) for the study of soot aggregates morphological influence on their thermophoretic behaviour,” Journal of Aerosol Science, vol. 113, pp. 40-51, 2017.

L. A. A. Yahia, E. Gehin, and B. Sagot, “Experimental validation of the trap (thermophoretic annular precipitator) in laminar configuration,” Journal of Aerosol Science, vol. 109, pp. 38-54, 2017.

M. Mcharek, M. Hammadi, T. Azib, J. Choley, and C. Larouci, “Multidisciplinary design and optimization using knowledge based engineering,” in CMSM International Congress Design and Modelling of Mechanical Systems, 2017.

R. Richard, A. Babin, J. marie Laurent, and N. Rizoug, “Procédé de détermination de caractéristiques physiques de batteries embarquées dans un véhicule électrique en fonction des missions à effectuer,” dec 13 2017. EP Patent EP 3 254 885 A1.

A. Babin, N. Rizoug, D. Boscher, Z. Hamdoun, and C. Larouci, “Tco computing of commercial electric vehicles using a multi-physical battery model,” in SIA : CONGRS La simulation numérique au coeur de l’innovation automobile, 2017.

M. Khammassi, J. Aubry, B. Barbedette, M. Cormerais, C. Larouci, and F. Benouezdou, “Optimization of hydro-mechanical model of a multiway valve used in automotive thermal management,” in 2017 IEEE International Conference on Advanced Intelligent Mechatronics (AIM), pp. 1582-1587, IEEE, 2017.

J. Godot, A. Alif, S. Saudrais, B. Barbedette, and C. Larouci, “Safety analysis of heterogeneous software models at implementation stage,” in SAE Technical Paper, no. 2017-01-0051, SAE International, 03 2017.

M. Khammassi, B. Barbedette, J. Aubry, M. Cormerais, C. Larouci, and F. Benouezdou, “Actuator torque optimization of an automotive thermal management mechatronic valve based on a hydro-mechanical modelling and experimental validation,” in CFM2017 Congrés Français de Mécanique, p. 16, 2017.

M. R. Boukhari, S. Glaser, A. Chaibet, and M. Boukhnifer, “Fault tolerant design for autonomous vehicle,” in 2017 4th International Conference on Control, Decision and Information Technologies (CoDIT), pp. 0721-0728, IEEE, 2017.

B. Bendjedia, F. Bouchafaa, N. Rizoug, and M. Boukhnifer, “Comparative study between battery and supercapacitor hybridization with fuel cells for automotive applications,” in 2017 4th International Conference on Control, Decision and Information Technologies (CoDIT), pp. 0833-0838, IEEE, 2017.

B. Bendjedia, N. Rizoug, M. Boukhnifer, and F. Bouchafaa, “Experimental energy management of hybrid fuel cell/battery system,” in 2017 14th International Multi-Conference on Systems, Signals and Devices (SSD), pp. 492-498, IEEE, 2017.

B. Bendjedia, N. Rizoug, M. Boukhnifer, and F. Bouchafaa, “Intelligent energy management of a multisource power supply for electric vehicle application,” in 2017 IEEE Vehicle Power and Propulsion Conference (VPPC), pp. 1-6, IEEE, dec 11 2017.

Y. Saadi, R. Sehab, A. Chaibet, M. Boukhnifer, and D. Diallo, “Performance comparison between conventional and robust control for the powertrain of an electric vehicle propelled by a switched reluctance machine,” in 2017 IEEE Vehicle Power and Propulsion Conference (VPPC), pp. 1-6, IEEE, dec 11 2017.

F. Yacef, N. Rizoug, O. Bouhali, and M. Hamerlain, “Optimization of energy consumption for quadrotor uav,” in Proceedings of the International Micro Air Vehicle Conference and Flight Competition (IMAV), Toulouse, France, pp. 18-21, 2017.

F. Yacef, N. Rizoug, L. Degaa, O. Bouhali, and M. Hamerlain, “Trajectory optimisation for a quadrotor helicopter considering energy consumption,” in 2017 4th International Conference on Control, Decision and Information Technologies (CoDIT), pp. 1030-1035, IEEE, 2017.

H. Alloui, F. Khoucha, N. Rizoug, M. Benbouzid, and A. Kheloui, “Comparative study between rule-based and frequency separation energy management strategies within fuelcell/ battery electric vehicle,” in 2017 IEEE International Conference on Environment and Electrical Engineering and 2017 IEEE Industrial and Commercial Power Systems Europe (EEEIC/IandCPS Europe), pp. 1-5, IEEE, 2017.

L. Degaa, B. Bendjedia, N. Rizoug, and S. Abdelkader, “Sizing of hybrid source battery/supercapacitor for automotive applications,” in 2017 Conference Internationale des Energies Renouvlable, Proceeding of Engineering and Tecnology-PET, vol. 28, pp. 17-22, 2017.

H. Soubra and A. Abran, “Functional size measurement for the internet of things (iot): an example using cosmic and the arduino open-source platform,” in Proceedings of the 27th International Workshop on Software Measurement and 12th International Conference on Software Process and Product Measurement, pp. 122-128, ACM, oct 25 2017.

M. Sehit, H. Soubra, and A. R. Cherif, “Assessment of software reliability needs using cosmic functional size measurement,” in 2017 IEEE Vehicle Power and Propulsion Conference (VPPC), pp. 1-8, IEEE, dec 11 2017.

M. Haggui, A. E. Mahi, Z. Jendli, A. Akrout, and M. Haddar, “Damage analysis of flax fibre/elium composite under static and fatigue testing,” in International Conference Design and Modeling of Mechanical Systems, pp. 681-691, Springer, Cham, 2017.

R. Rodriguez, F. Murzyn, A. Mehel, and F. Larrarte, “Experimental study of the wake flow behind three road vehicle models,” in 23ème Congrés Français de Mécanique, (LILLE, France), p. 13, Aug 2017.

P. Cuvelier, B. P. rouland A. Mehel1, F.murzyn, F. Joly, and B. Bruge, “On-board measurements to assess in-cabin vehicle air quality in paris,” in 22nd International Transport and Air Pollution Conference, Zurich, 2017.

G. Fokoua, S. P. A. Durand, A. Mehel, and F. Murzyn, “Particle dispersion from railway rolling stock: Preliminary results from wind tunnel experiments and cfd,” in 22nd International Transports

A. Babin, N. Rizoug, D. Boscher, Z. Hamdoun, and C. Larouci, “Optimisation du coût de revient global d’un véhicule électrique utilitaire 3,5t,” revue 3EI (Enseigner l’Electrotechnique et l’Electronique Industrielle), no. 87, 2017.

M. Chauvin and Y. Lebaupin, “Capacité d’absorption d’énergie d’une structure tubulaire en composite hybride,” Congrés français de mécanique, 2017.

N. Keita, A. Mehel, F. Murzyn, A. Taniere, and B. Diourte, “Influence des structures tourbillonnaires et de la turbulence sur la dispersion des nanoparticules de carbone,” Congrés français de mécanique, 2017.

M. Boukhnifer, N. Ouddah, T. Azib, and A. Chaibet, “Intelligent energy management for hybrid fuel cell/battery system,” COMPEL-The international journal for computation and mathematics in electrical and electronic engineering, vol. 35, no. 5, pp. 1850-1864, 2016.

S. Aouaouda, M. Chadli, and M. Boukhnifer, “Speed sensor fault tolerant controller design for induction motor drive in ev,” Neurocomputing, vol. 214, pp. 32-43, nov 19 2016.

A. Raisemche, M. Boukhnifer, and D. Diallo, “New fault-tolerant control architectures based on voting algorithms for electric vehicle induction motor drive,” Transactions of the Institute of Measurement and Control, vol. 38, no. 9, pp. 1120-1135, 2016.

N. Ouddah, M. Boukhnifer, A. Chaibet, and E. Monmasson, “Fixed structure h-infinity loop shaping control of switched reluctance motor for electrical vehicle,” Mathematics and Computers in Simulation, vol. 130, pp. 124-141, 2016.

A. Chabir, M. Boukhnifer, Y. Bouteraa, A. Chaibet, and J. Ghommam, “Modelling and fixed order robust h -infinity control of aerial vehicle: Simulation and experimental results,” COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, vol. 35, no. 3, pp. 1064-1085, 2016.

N. Hadroug, A. Hafaifa, A. Kouzou, M. Guemana, and A. Chaibet, “Control of the speed and exhaust gas temperature in gas turbine using adaptive neuro-fuzzy inference system,” Journal of Automation and Systems Engineering, vol. 10, no. 3, pp. 158-167, 2016.

N. Hadroug, A. Hafaifa, A. Kouzou, and A. Chaibet, “Faults detection in gas turbine using hybrid adaptive network based fuzzy inference systems,” Diagnostyka, vol. 17, 2016.

N. Hadroug, A. Hafaifa, A. Kouzou, M. Guemana, and A. Chaibet, “Control of nonlinear gas turbine system using strategies of multidisciplinary design optimization,” Journal of the Technical University Sofia, Branch Plovdiv, Bulgaria, Fundamental Sciences and Applications, vol. 22, pp. 17-24, 2016.

N. Hadroug, A. Hafaifa, A. Kouzou, and A. Chaibet, “Improved gas turbine supervision system based on fuzzy estimation of their reliability and availability,” Journal of Advanced Research in Science and Technology, vol. 3, no. 2, pp. 313-323, 2016.

T. Mesbahi, F. Khenfri, N. Rizoug, K. Chaaban, P. Bartholomeüs, and P. L. Moigne, “Dynamical modeling of li-ion batteries for electric vehicle applications based on hybrid particle swarmneldermead (psonm) optimization algorithm,” Electric power systems research, vol. 131, pp. 195-204, 2016.

T. Mesbahi, F. Khenfri, N. Rizoug, P. Bartholomeüs, and P. L. Moigne, “Combined optimal sizing and control of li-ion battery/supercapacitor embedded power supply using hybrid particle swarmneldermead algorithm,” IEEE Transactions on Sustainable Energy, vol. 8, no. 1, pp. 59-73, 2016.

T. Mesbahi, N. Rizoug, F. Khenfri, P. Bartholomeüs, and P. L. Moigne, “Dynamical modelling and emulation of li-ion batteries/supercapacitors hybrid power supply for electric vehicle applications,” IET Electrical Systems in Transportation, vol. 7, no. 2, pp. 161-169, 2016.

F. Yacef, O. Bouhali, M. Hamerlain, and N. Rizoug, “Observer-based adaptive fuzzy backstepping tracking control of quadrotor unmanned aerial vehicle powered by li-ion battery,” Journal of Intelligent and Robotic Systems, vol. 84, no. 1-4, pp. 179-197, 2016.

N. Hadroug, A. Hafaifa, A. Kouzou, M. Guemana, and A. Chaibet, “Regular paper control of the speed and exhaust gas temperature in gas turbine using adaptive neuro-fuzzy inference system,” 3, vol. 10, no. 3, pp. 158-167, 2016.

A. Monti, A. E. Mahi, Z. Jendli, and L. Guillaumat, “Mechanical behaviour and damage mechanisms analysis of a ax-fibre reinforced composite by acoustic emission,” Composites Part A: Applied Science and Manufacturing, vol. 90, pp. 100-110, 2016.

M. Tientcheu-nsiewe, D. Tcheukamtoko, F. Murzyn, A. Mehel, and B. Patte-rouland, “Numerical study of a turbulent flow in the near-wake of an ahmed body,” American Journal of Environmental Engineering, vol. 6, no. 6, pp. 157-163, 2016.

F. Murzyn and A. Mehel, “Influence of the virtual origin on the turbulent length scales in the grid-generated turbulence,” International Journal of Fluid Mechanics Research, vol. 43, no. 1, 2016.

S. Bourdim, T. Azib, K. Hemsas, and C. Larouci, “Efficient energy management strategy for fuel cell ultracapacitor hybrid system,” in 2016 International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles and International Transportation Electrification Conference (ESARS-ITEC), pp. 1-6, IEEE, 2016.

M. Mcharek, M. Hammadi, J. yves Choley, T. Azib, and C. Larouci, “Modeling and multiobjective optimization of an electronic throttle in open-loop,” in 2016 11th France-Japan and 9th Europe-Asia Congress on Mechatronics (MECATRONICS)/17th International Conference on Research and Education in Mechatronics (REM), pp. 331-335, IEEE, 2016.

T. Azib, N. Bleichner, A. Ceschia, A. Trompe, B. Mathevet, and C. Larouci, “Adaptive control of hybrid photovoltaic generator for onboard automotive application,” in 2016 International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles and International Transportation Electrification Conference (ESARS-ITEC), pp. 1-6, IEEE, 2016.

A. Babin, D. Boscher, Z. Hamdoun, N. Rizoug, T. Mesbahi, and C. Larouci, “Tco improvement of commercial electric vehicles using battery sizing and intelligent charge method,” in 2016 International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles and International Transportation Electrification Conference (ESARS-ITEC), pp. 1-6, IEEE, 2016.

A. Babin, N. Rizoug, D. Boscher, Z. Hamdoun, and C. Larouci, “Tco improvement of 3.5t light-duty commercial electric vehicle according to embedded energy storage system sizing,” in PROPELEC’16, 2016.

M. Khammassi, T. Marimbordes, J. Aubry, B. Barbedette, M. Cormerais, C. Larouci, and Q. Frossard, “A multi-physical model of an active thermal management valve with experimental validation,” in SAE Technical Paper, no. 2016-01-0180, SAE International, 04 2016.

J. Godot, S. Saudrais, A. Alif, B. Barbedette, and C. Larouci, “Safety analysis generation from prototyping models for transportation systems,” in Proceedings of the 31st Annual ACM Symposium on Applied Computing, pp. 1777-1779, ACM, 2016.

B. Bendjedia, H. Alloui, N. Rizoug, M. Boukhnifer, F. Bouchafaa, and M. Benbouzid, “Sizing and energy management strategy for hybrid fc/battery electric vehicle,” in IECON 2016-42nd Annual Conference of the IEEE Industrial Electronics Society, pp. 2111-2116, IEEE, oct 23 2016.

M. R. Boukhari, A. Chaibet, M. Boukhnifer, and S. Glaser, “Sensor fault tolerant control strategy for autonomous vehicle driving,” in 2016 13th International Multi-Conference on Systems, Signals and Devices (SSD), pp. 241-248, IEEE, 2016.

A. Raisemche, A. Chaibet, M. Boukhnifer, and D. Diallo, “Mechanical sensor ftc using sub-optimal sliding mode observer for electrical vehicle induction motor drive,” in 2016 13th International Multi-Conference on Systems, Signals and Devices (SSD), pp. 249-254, IEEE, 2016.

N. Hadroug, A. Hafaifa, A. Kouzou, and A. Chaibet, “Improvement of gas turbine availability using reliability modeling based on fuzzy system,” in International Congress on Technical Diagnostic, pp. 15-28, Springer, Cham, 2016.

N. Hadroug, A. Hafaifa, A. Kouzou, B. Nail, M. Guemana, S. Abudura, and A. Chaibet, “Active fault tolerant control based on a fuzzy system applied to a turbocharger,” in 2016 8th International Conference on Modelling, Identification and Control (ICMIC), pp. 560-565, IEEE, nov 15 2016.

H. Loulou, S. Saudrais, H. Soubra, and C. Larouci, “Adapting security policy at runtime for connected autonomous vehicles,” in 2016 IEEE 25th International Conference on Enabling Technologies: Infrastructure for Collaborative Enterprises (WETICE), pp. 26-31, IEEE, 2016.

T. Mesbahi, M. Meradji, G. Wang, D. Xu, and N. Rizoug, “Dynamic modeling and optimal control for series-parallel drivetrain based on lithium-ion battery,” in PCIM Europe 2016; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, pp. 1-5, VDE, 2016.

M. Haggui, Z. Jendli, A. Akrout, A. E. Mahi, and M. Haddar, “Damage identification in flax fibre composite with thermoplastic matrix under quasi-static loading,” in International Conference on Advanced Materials, Mechanics and Manufacturing A3M, 2016.

N. Keita, A. Mehel, F. Murzyn, B. Diourte, and A. Tanière, “Numerical study of the dispersion of carbon nanoparticles in the near wake of a cylinder,” in 22nd European Aerosol Conference, 2016.

R. R. A. Mehel and F. Murzyn, “The interactions of the exhaust ultrafine particle with the vehicle near wake flow,” in 21st International Transport and Air Pollution Conference, Lyon, 2016.

L. A. A. Yahia, E. Gehin, and B. Sagot, “Application of a tri-thermal thermophoretic precipitator for the study of soot aggregates morphological in uence on their thermophoretic behaviour.,” in European Aerosol Conference, 2016.

F. T. Y. Lebaupin, T. quynh Truong-hoang, and M. Chauvin, “Effect of stacking sequence on low velocity impact and post-impact behaviour of flax/polyamide 11 composites,” in ECCM, 2016.

F. T. Y. Lebaupin, T. quynh Truong-hoang, and M. Chauvin, “Influence of stacking sequence on low velocity impact and post-impact behavior of flax/polyamide 11 composites,” in International Workshop DynEcoComp, 2016.

J. Godot, A. Alif, S. Saudrais, and B. Barbedette, “Nouvelle méthodologie de développement de logiciels embarqués dans la phase de prototypage,” Congrés Lambda Mu 20 de Maîtrise des Risques et de Sûreté de Fonctionnement, 11-13 Octobre 2016, Saint Malo, France, 2016.

M. Sehit, A. Bracquemond, H. Soubra, and A. R. Cherif, “Méthode d’évaluation des exigences de fiabilité pour des modules logiciel embarqués à partir de spécifications,” Congrés Lambda Mu 20 de Maîtrise des Risques et de Sûreté de Fonctionnement, 11-13 Octobre 2016, Saint Malo, France, 2016.

A. Babin, N. Rizoug, D. Boscher, Z. Hamdoun, and C. Larouci, “Optimisation du coût de revient global d’un véhicule électrique utilitaire 3, 5t,” in Symposium de Genie Electrique, (Grenoble, France), 06 2016.

T. A. J. Aubry, I. Miladi, and B. Barbedette, “Optimisation de la gestion d’énergie d’un véhicule à propulsion humaine à assistance électrique autonome,” in SGE 2016, 2016.

T. Azib, M. Bendali, C. Larouci, and K. Hemsas, “Fault tolerant control of interleaved buck converter for automotive application,” International Review of Electrical Engineering (IREE), vol. 10, no. 3, pp. 336-343, 2015.

S. Aouaouda, M. Chadli, M. Boukhnifer, and H. reza Karimi, “Robust fault tolerant tracking controller design for vehicle dynamics: A descriptor approach,” mechatronics, vol. 30, pp. 316-326, 2015.

C. L. H. Loulou, S. Saudrais, and H. Soubra, “Eficiently monitoring dynamic data-streams in smart cities,” Conférence en IngénieriE du Logiciel (CIEL), 2015.

S. Zouari, J. michel Genevaux, J. Brocail, and F. Ablitzer, “Formation of band gaps in thin plate with a periodic array of resonators,” Congrés français de mécanique, 2015.

A. Mehel and F. Murzyn, “Effect of air velocity on nanoparticles dispersion in the wake of a vehicle model: wind tunnel experiments,” Atmospheric Pollution research, no. 6, pp. 612-617, 2015.

H. Wang, F. Murzyn, and H. Chanson, “Interaction between free-surface, two-phase flow and total pressure in hydraulic jump,” Experimental Thermal and Fluid Science, vol. 64, pp. 30-41, 2015.

A. Mehel and F. Murzyn, “Atm spheric pollution research,” Atmospheric Pollution Research, vol. 6, pp. 612-617, 2015.

S. Bourdim, K. eddine Hemsas, Y. Harbouche, and T. Azib, “Multi phases stator shortcircuits faults diagnosis and classification in dfig using wavelet and fuzzy based technique,” in 2015 3rd International Conference on Control, Engineering and Information Technology (CEIT), pp. 1-6, IEEE, 2015.

N. Ouddah, N. Loukkas, A. Chaibet, M. Boukhnifer, and E. Monmasson, “Experimental evaluation of second sliding modes observer and extended kalman filter in a sensorless robust control of switched reluctance motor for ev application,” in 2015 23rd Mediterranean Conference on Control and Automation (MED), pp. 986-992, IEEE, 2015.

Y. Rkhissi-kammoun, J. Ghommam, M. Boukhnifer, and F. Mnif, “Rise-backsteppping feedback control for induction machine in electric vehicle applications,” in 2015 23rd Mediterranean Conference on Control and Automation (MED), pp. 596-602, IEEE, 2015.

Y. Rkhissi-kammoun, J. Ghommam, M. Boukhnifer, and F. Mnif, “Rise feedback control for induction machine in electric vehicle applications,” in 2015 7th International Conference on Modelling, Identification and Control (ICMIC), pp. 1-6, IEEE, dec 18 2015.

A. Chabir, M. Boukhnifer, Y. Bouteraa, A. Chaibet, and J. Ghommam, “Real time fixed order robust h-infinity orientation control for 3-dof helicopter,” in 2015 IEEE 12th International Multi-Conference on Systems, Signals and Devices (SSD15), pp. 1-7, IEEE, 2015.

V. Judalet, S. Glaser, D. Gruyer, and S. Mammar, “Imm-based sensor fault detection and localization for a drive-by-wire vehicle,” in IFAC Safeprocess 2015, 9th International Symposium on Fault Detection, Supervision and Safety for Technical Processes, (Paris,France), 2015.

O. Orfila, D. Gruyer, V. Judalet, and M. Revilloud, “Ecodriving performances of human drivers in a virtual and realistic world,” in 2015 IEEE Intelligent Vehicles Symposium (IV), pp. 790-795, IEEE, 2015.

F. Khenfri, K. Chaaban, and M. Chetto, “A novel heuristic algorithm for mapping autosar runnables to tasks,” in 2015 International Conference on Pervasive and Embedded Computing and Communication Systems (PECCS), pp. 1-8, IEEE, 2015.

F. Khenfri, “A holistic optimization approach for the synthesis of autosar e/e architecture,” in Proceedings of the 30th Annual ACM Symposium on Applied Computing, pp. 1960-1961, ACM, 2015.

P. Leserf, P. D. Saqui-sannes, and J. Hugues, “Multi domain optimization with sysml modeling,” in 2015 IEEE 20th Conference on Emerging Technologies and Factory Automation (ETFA), pp. 1-8, IEEE, 2015.

P. Leserf, P. D. Saqui-sannes, J. Hugues, and K. Chaaban, “Sysml modeling for embedded systems design optimization: A case study,” in 2015 3rd International Conference on Model-Driven Engineering and Software Development (MODELSWARD), pp. 449-457, IEEE, 2015.

M. Y. Hammoudi, M. H. Benbouzid, N. Rizoug, and A. Allag, “New state observer based on takagi-sugeno fuzzy controller of induction motor,” in 2015 4th international conference on systems and control (ICSC), pp. 145-150, IEEE, 2015.

Y. Senecaut, M.Watremez, J. Brocail, L. Fouilland-paille, and L. Dubar, “Dynamic recrystallization observed at the tool/chip interface in machining,” in Key Engineering Materials, vol. 651, pp. 1223-1228, Trans Tech Publications, 2015.

S. Zouari, J. michel Genevaux, J. Brocail, and F. Ablitzer, “Wave propagation in phononiccrystal composites plates,” in DYNCOMP’2015 – International conference on dynamics of Composite Structures, 2015.

A. Mehel and F. Murzyn, “Correlation between ultrafine particle dispersion and mean and turbulent flow structure in the near wake of a vehicle,” in 13th International Symposium on Fluid Control, Measurement and Visualization (FLUCOME 2015), p. 10 pages, 2015.

L. A. A. Yahia, E. Gehin, and B. Sagot, “A new experimental device for the thermophoretic velocity measurements of nanoparticle soot aggregates,” in European Aerosol Conference, 2015.

B. A. L. Y., C. M., T. H. T.q., and T. F., “Flax fiber reinforced polyamide 11 composite : influence of constituents and process parameters,,” in ICNF2, 2015.

A. B. Y. Lebaupin, T. quynh Truong-hoang, M. Chauvin, and F. Touchard, “The relation between manufacturing process and properties of a biobased composite flax fiber/polyamide 11,” in International Conference on Biopolymers, 2015.

A. Monti, A. E. Mahi, G. Laurent, and Z. Jendli, “Analyse de l’endommagement d’un composite à matrice thermoplastique renforcée de fibres de lin par émission acoustique,” in Congrés français de mécanique, AFM, Association Française de Mécanique, 2015.

F. T. Y. Lebaupin, T. quynh Truong-hoang, and M. Chauvin, “Optimisation des propriétés microstructurales et mécaniques d’un composite lin / polyamide11,” in JNC19, 2015.

T. Azib, C. Larouci, A. Chaibet, and M. Boukhnifer, “Online energy management strategy of a hybrid fuel cell/battery/ultracapacitor vehicular power system,” IEEJ Transactions on Electrical and Electronic Engineering, vol. 9, no. 5, pp. 548-554, 2014.

M. Bendali, C. Larouci, T. Azib, C. Marchand, and G. Coquery, “Design methodology of an interleaved buck converter for onboard automotive application, multi-objective optimisation under multi-physic constraints,” IET Electrical Systems in Transportation, vol. 5, no. 2, pp. 53-60, 2014.

T. Azib, K. Hemsas, and C. Larouci, “Energy management and control strategy of hybrid energy storage system for fuel cell power sources,” Int. Rev. Model. Simul.(IREMOS), vol. 7, no. 6, p. 935, 2014.

J. Aubry and B. Barbedette, “Assessment of the interest of series hybridisation for a human-powered vehicle. electric pedal generator pre-sizing,” European Journal of Electrical Engineering No, vol. 5, no. 6, pp. 419-438, 2014.

M. Boukhnifer and A. Chaibet, “Robust control of aerial vehicle flight: simulation and experimental results,” IEEE Aerospace and Electronic Systems Magazine, vol. 29, no. 9, pp. 4-12, 2014.

V. Judalet, S. Glaser, C. Boussard, and S. Mammar, “Implementation of first order algebraic estimators for numerical filtering and derivation applications,” IFAC Proceedings Volumes, vol. 47, no. 3, pp. 9152-9158, 2014.

H. Boudjedir, O. Bouhali, and N. Rizoug, “Adaptive neural network control based on neural observer for quadrotor unmanned aerial vehicle,” Advanced Robotics, vol. 28, no. 17, pp. 1151-1164, 2014.

O. Bouhali, B. Francois, and N. Rizoug, “Equivalent matrix structure modelling and control of a three-phase flying capacitor multilevel inverter,” IET Power Electronics, vol. 7, no. 7, pp. 1787-1796, 2014.

O. Bouhali, B. Francois, and N. Rizoug, “Line-to-line voltage space vector modulation for neutral-point clamped multi-level converter with dc-link capacitor voltage balancing using redundant vectors,” Electric Power Components and Systems, vol. 42, no. 10, pp. 1070-1086, 2014.

C. Ebert and H. Soubra, “Functional size estimation technologies for software maintenance,” IEEE Software, vol. 31, no. 6, pp. 24-29, 2014.

H. Wang, F. Murzyn, and H. Chanson, “Total pressure fluctuations and two-phase flow turbulence in hydraulic jumps,” Experiments in Fluids, vol. 55, no. 1847, p. 16, 2014.

M. Bendali, C. Larouci, T. Azib, C. Marchand, and G. Coquery, “Reliability assesment in the design of interleaved converters under multi-physical constraints,” in 2014 IEEE 23rd International Symposium on Industrial Electronics (ISIE), pp. 2117-2121, IEEE, 2014.

M. Younsi, M. Bendali, T. Azib, C. Larouci, C. Marchand, and G. Coquery, “Current sharing control technique of interleaved buck converter for automotive application,” in 7th IET International Conference on Power Electronics, Machines and Drives (PEMD 2014), IET Digital Library, 2014.

M. Bendali, C. Larouci, T. Azib, C. Marchand, and G. Coquery, “Design with optimization of an interleaved buck converter for automotive application; effect of the emc constraint,” in 7th IET International Conference on Power Electronics, Machines and Drives (PEMD 2014), IET Digital Library, 2014.

N. Ouddah, M. Boukhnifer, A. Chaibet, and E. Monmasson, “Robust controller designs of switched reluctance motor for electrical vehicle,” in 22nd Mediterranean Conference on Control and Automation, pp. 212-217, IEEE, 2014.

S. Aouaouda, M. Boukhnifer, and O. Bouhali, “Sensor fault observer design for uncertain takagi-sugeno systems,” in 2014 IEEE 23rd International Symposium on Industrial Electronics (ISIE), pp. 236-241, IEEE, 2014.

R. Oubellil and M. Boukhnifer, “Passive fault tolerant control design of energy management system for electric vehicle,” in 2014 IEEE 23rd International Symposium on Industrial Electronics (ISIE), pp. 1402-1408, IEEE, 2014.

S. Aouaouda and M. Boukhnifer, “Observer-based fault tolerant controller design for induction motor drive in ev,” in 2014 IEEE Conference on Control Applications (CCA), pp. 1190-1195, IEEE, 2014.

N. Ouddah, M. Boukhnifer, A. Chaibet, E. Monmasson, and E. Berthelot, “Experimental robust h-inffnity controller design of switched reluctance motor for electrical vehicle application,” in 2014 IEEE Conference on Control Applications (CCA), pp. 1570-1575, IEEE, 2014.

A. C. Estaca and M. Boukhnifer, “Experimental second order sliding mode fault tolerant control for moment gyroscope system with sensor fault,” in 2014 International Conference on Control, Decision and Information Technologies (CoDIT), pp. 405-410, IEEE, 2014.

N. Ouddah, M. Boukhnifer, A. Chaibet, and E. Monmasson, “Robust lpv current control of switched reluctance motors,” in 22nd Mediterranean Conference on Control and Automation, pp. 218-223, IEEE, 2014.

A. Raisemeche, M. Boukhnifer, C. Larouci, and D. Diallo, “Experimental gimc fault tolerant control using fixed order infinity approach for ev induction motor drive,” in MED ’14, (Palerme, Italy), 06 2014.

V. Judalet, M. Dhaoui, S. Glaser, and S. Mammar, “Fuzzy logic slip rate controller for experimental test vehicle,” in 17th International IEEE Conference on Intelligent Transportation Systems (ITSC), pp. 3016-3021, IEEE, 2014.

B. Tchakaloff, S. Saudrais, and J. philippe Babau, “Efficient models cofiguration for an electric vehicle energy management software,” in 2014 40th EUROMICRO Conference on Software Engineering and Advanced Applications, pp. 48-55, IEEE, 2014.

B. Tchakaloff, S. Saudrais, and J. philippe Babau, “Integration of physical models in the orqa framework for electric vehicle energy management,” in Proceedings of the 19th international doctoral symposium on Components and architecture, pp. 7-12, ACM, 2014.

H. Soubra, A. Abran, and A. Ramdane-cherif, “Verifying the accuracy of automation tools for the measurement of software with cosmic{iso 19761 including an autosar-based example and a case study,” in 2014 Joint Conference of the International Workshop on Software Measurement and the International Conference on Software Process and Product Measurement, pp. 23-31, IEEE, 2014.

K. L. Mercier, M. Watremez, J. Brocail, and L. Dubar, “Evolution of dynamic recrystallization of aisi-1045 steel under critical friction conditions,” in Advanced Materials Research, vol. 966, pp. 168-174, Trans Tech Publications, 2014.

Y. Senecaut, M. Watremez, J. Brocail, and L. Dubar, “Identification of friction law to model orthogonal cutting,” in Key Engineering Materials, vol. 611, pp. 1194-1201, Trans Tech Publications, 2014.

Z. Jendli, J. Walrick, M. Bocquet, and J. Fitoussi, “Strain rate effects on the mechanical behavior of carbon-thermoplastic matrix woven composites,” in ECCM16-16th European Conference on Composite Materials, 2014.

H.Wang, F. Murzyn, and H. Chanson, “Pressure fluctuations and air-water flow properties in hydraulic jumps,” in 11th National Conference on Hydraulics in Civil Engineering and 5th International Symposium on Hydraulic Structures: Hydraulic Structures and Society-Engineering Challenges and Extremes, p. 180, Engineers Australia, 2014.

L. A. A. Yahia, E. Gehin, and B. Sagot, “Tri-thermal device sizing for thermophoresis deposition measurements of nanoparticle soot aggregates,” in International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 2014.

J. Aubry, T. Azib, K. Chaaban, S. Gillet, J. Lefeuve, A. Mehel, F. Murzyn, S. Saudrais, and R. Sehab, “L’initiation des étudiants au domaine de la recherche en école d’ingénieurs : l’exemple des projets pirate à l’estaca,” 3EI, no. 76, pp. 5-12, 2014.

M. Bendali, C. Larouci, T. Azib, C. Marchand, and G. Coquery, “Intégration de la fiabilité dans la conception sous contraintes multi-physiques des convertisseurs statiques multicellulaires,” in Symposium de Génie Electrique 2014, 2014.

J. Aubry and B. Barbedette, “Evaluation de l’intérêt d’une hybridation série pour un véhicule à propulsion humaine. pré-dimensionnement d’une génératrice-pédalier,” in Symposium de Génie Electrique 2014, 2014.

P. Estival, G. Krebs, C. Marchand, R. Sehab, and B. Barbedette, “Pré-dimensionnement d’une machine synchrone à aimants permanents validé par un modèle dynamique,” in Symposium de Génie Electrique 2014, 2014.

T. Mesbahi, N. Rizoug, P. Bartholomeus, and P. L. Moigne, “Pris en compte du vieillissement pour la modèlisation d’une source hybride batterie/supercondensateur,” in Symposium de Génie Electrique 2014, 2014.

C. Larouci, T. Azib, A. Chaibet, and M. Boukhnifer, “Control of a flyback converter in mixed conduction mode: Influence on the converter design using optimization under constraints,” IEEJ Journal of Industry Applications, vol. 2, no. 3, pp. 132-140, 2013.

A. Raisemche, M. Boukhnifer, C. Larouci, and D. Diallo, “Two active fault-tolerant control schemes of induction-motor drive in ev or hev,” IEEE Transactions on Vehicular Technology, vol. 63, no. 1, pp. 19-29, 2013.

M. Boukhnifer and A. Ferreira, “Fault tolerant control of a teleoperated piezoelectric microgripper,” Asian Journal of Control, vol. 15, no. 3, pp. 888-900, 2013.

R. Souad, K. Fouad, and D. Said, “Development and realization of an intelligent power strip for energy consumption management in hybrid wind/photovoltaic systems,” Energy Procedia, vol. 42, pp. 530-538, 2013.

C. Ledoux, P. Lefranc, and C. Larouci, “Pre-sizing methodology of dcac converters using a virtual prototyping tool applied to sequential multi-load systems,” IET Power Electronics, vol. 6, no. 2, pp. 244-250, 2013.

C. Ledoux, P. Lefranc, and C. Larouci, “Pre-sizing methodology of embedded static converters using a virtual prototyping tool based on an optimisation under constraints method: comparaison of two power-sharing topologies,” IET Electrical Systems in Transportation, vol. 3, no. 1, pp. 1-9, 2013.

O. Bouhali, F. Bouaziz, N. Rizoug, and A. Talha, “Solving harmonic elimination equations in multi-level inverters by using neural networks,” International journal of information and electronics engineering, vol. 3, no. 2, p. 191, 2013.

D. Tcheukam-toko, M. Mokem-chetchueng, R. Mouangué, T. Beda, and F. Murzyn, “Characterization of hydraulic jump over an obstacle in open-channel flow,” International Journal of Hydraulic Engineering (IJHE), vol. 2, no. 5, p. 2013, 2013.

B. Sagot, “Thermophoresis for spherical particles,” Journal of Aerosol Science, vol. 65, pp. 10-20, 2013.

T. Q. T. Hoang and F. Touchard, “Non-woven ax fibre reinforced polypropylene: Static and low velocity impact behaviour,” Polymers and Polymer Composites, vol. 21, no. 5, pp. 287-298, 2013.

M. Bendali, C. Larouci, T. Azib, C. Marchand, and G. Coquery, “Design methodology with optimization of an interleaved buck converter for automotive application,” in Eurocon 2013, pp. 1066-1072, IEEE, 2013.

M. Bendali, C. Larouci, T. Azib, C. Marchand, and G. Coquery, “Design of interleaved power converters under volume, efficiency and thermal constraints,” in PCIM Europe Conference (Power Conversion Intelligent Motion), pp. 1316-1323, 2013.

M. Boukhnifer, A. Raisemche, D. Diallo, and C. Larouci, “Fault tolerant control to mechanical sensor failures for induction motor drive: A comparative study of voting algorithms,” in IECON 2013-39th Annual Conference of the IEEE Industrial Electronics Society, pp. 2851-2856, IEEE, nov 10 2013.

N. Ouddah, M. Boukhnifer, and A. Raisemche, “Two control energy management schemes for electrical hybrid vehicle,” in 10th International Multi-Conferences on Systems, Signals and Devices 2013 (SSD13), pp. 1-6, IEEE, 2013.

A. Raisemeche, M. Boukhnifer, and D. Diallo, “Fault tolerant control design of induction motor drive in electrical vehicle: A hybrid control approach,” in IEEE MED 2013, pp. 40-45, 2013.

A. Chaibet and M. Boukhnifer, “Experimental passive fault tolerant control for gyroscope system,” in 21st Mediterranean Conference on Control and Automation, pp. 167-172, IEEE, 2013.

D. Gruyer, O. Orfila, V. Judalet, S. Pechberti, B. Lusetti, and S. Glaser, “Proposal of a virtual and immersive 3d architecture dedicated for prototyping, test and evaluation of eco-driving applications,” in 2013 IEEE Intelligent Vehicles Symposium (IV), pp. 511-518, IEEE, 2013.

V. Judalet, S. Glaser, and B. Lusetti, “Incentive shared trajectory control for highlyautomated driving,” in 2013 IEEE Intelligent Vehicles Symposium (IV), pp. 1089-1094, IEEE, 2013.

T. Mesbahi, N. Rizoug, P. Bartholomeüs, and P. L. Moigne, “Li-ion battery emulator for electric vehicle applications,” in 2013 IEEE Vehicle Power and Propulsion Conference (VPPC), pp. 1-8, IEEE, oct 15 2013.

R. Sadoun, N. Rizoug, P. Bartholomeüs, and P. L. Moigne, “Optimal architecture of the hybrid source (battery/supercapacitor) supplying an electric vehicle according to the required autonomy,” in 2013 15th European Conference on Power Electronics and Applications (EPE), pp. 1-7, IEEE, 2013.

N. Rizoug, P. Bartholomeüs, and P. L. Moigne, “Using of aqueous or organic supercapacitor technology in hybrid and electric vehicle?,” in 2013 15th European Conference on Power Electronics and Applications (EPE), pp. 1-18, IEEE, 2013.

B. Tchakaloff, S. Saudrais, and J. philippe Babau, “Orqa: Modeling energy and quality of service within autosar models,” in Proceedings of the 9th international ACM Sigsoft conference on Quality of software architectures, pp. 3{12, ACM, 2013.

K. kiu Lau, C. Tran, S. Saudrais, and B. Tchakaloff, “A holistic (component-based) approach to autosar designs,” in 2013 39th Euromicro Conference on Software Engineering and Advanced Applications, pp. 203-207, IEEE, 2013.

R. Sehab and T. Shanan, “Control laws for the emulation of an electric vehicle drivetrain by two electric machines,” in 2013 IEEE Vehicle Power and Propulsion Conference (VPPC), pp. 1-7, IEEE, oct 15 2013.

H. Soubra, “Fast functional size measurement with synchronous languages: An approach based on lustre and on the cosmic iso 19761 standard,” in 2013 Joint Conference of the 23rd International Workshop on Software Measurement and the 8th International Conference on Software Process and Product Measurement, pp. 3-8, IEEE, oct 23 2013.

A. Mehel, “Comparison of nanoparticles deposition in turbulent flows using electrophoresis and two different charging mechanisms,” in AIP Conference Proceedings, vol. 1558, pp. 1091-1094, AIP, oct 17 2013.

A. Raisemeche, M. Boukhnifer, C. Larouci, and D. Diallo, “Commande tolérante aux défauts du capteur mécanique d’une machine asynchrone dans une chaîne de traction d’un véhicule electrique,” La Revue 3 E. I, 07 2013.

N. Bedrici-frai, B. Vacossin, and P. Gatignol, “Génération d’ondes modales dans une structure multicouche plane par l’impact d’un faisceau ultrasonore,” Congrés français de mécanique, dec 20 2013.

Y. Lebaupin, T. T. Hoang, M. Chauvin, F. Touchard, and A. Beigbeder, “Propriétés microstructurales et mecaniques d’un composite unidirectionnel lin/polyamide 11-étude préliminaire visant à optimiser le procédé d’élaboration de l’écocomposite,” Matériaux and Techniques, vol. 101, no. 7, p. N24, 2013.

M. Hassar, S. Gillet, J. Walrick, and M. Benzeggagh, “Optimisation de la mise en oeuvre de composites à résine nano-chargée,” JNC18, 2013.

T. quynh Truong Hoang and D. tan Tran, “Comportement mécanique d’un composite à base de fibres tissées de chanvre et de résine époxy biosourcée,” in JNC18, 2013.

M. Boukhnifer, A. Chaibet, T. Azib, and C. Larouci, “Design of a tele-control electrical vehicle system using a fuzzy logic control,” International Journal of Advanced Robotic Systems, vol. 9, p. 224, nov 30 2012.

M. Boukhnifer, “Active fault tolerant control for ultrasonic piezoelectric motor,” Journal of Electrical Engineering, vol. 63, no. 4, pp. 224-232, 2012.

F. Khenfri, S. Rafa, and S. Diaf, “Un environnement matériel et logiciel sous matlab pour le contrôle de la charge et de la validation des algorithms de la gestion de l’énergie des systèmes hybrides,” The 2nd International Seminar on New and Renewable Energies, Ghardaia, Algeria, 2012.

C. Larouci, K. Ejjabraoui, P. Lefranc, and C. Marchand, “Impact of the control constraint on a buck converter design based on multi-objective optimization procedure,” International Journal of Power Electronics and Drive Systems, vol. 2, no. 3, p. 257, 2012.

C. Larouci, K. Ejjabraoui, P. Lefranc, and C. Marchand, “Placement optimization of power components in static power converters under spatial and thermal constraints,” Journal of Power Electronics, vol. 12, no. 2, pp. 368-376, 2012.

R. Sehab and B. Barbedette, “Fuzzy pid supervision for an automotive application: Design and implementation,” PID Controller Design Approaches: Theory, Tuning and Application to Frontier Areas, p. 101, 2012.

M.Watremez, D. Méresse, L. Dubar, and J. Brocail, “Finite element modelling of orthogonal cutting: sensitivity analysis of material and contact parameters,” International Journal of Simulation and Process Modelling, vol. 7, no. 4, pp. 262-274, 2012.

A. Mehel, B. Sagot, A. Tanière, and B. Oesterlé, “On the mutual effect of the turbulent dispersion model and thermophoresis on nanoparticle deposition,” International Journal of Nonlinear Sciences and Numerical Simulation, vol. 13, no. 6, pp. 417-425, 2012.

O. Bethoux, G. Remy, J. Riera, M. Serra, and T. Azib, “Analyses of energy management strategies for a pemfc/uc electric vehicle,” in 2012 IEEE Vehicle Power and Propulsion Conference, pp. 956-961, IEEE, 2012.

M. Boukhnifer, A. Chaibet, T. Azib, and C. Larouci, “Tele-control electrical vehicle system using wave variables,” in International Multi-Conference on Systems, Signals and Devices, pp. 1-6, IEEE, 2012.

M. Boukhnifer, A. Chaibet, T. Azib, and C. Larouci, “Fuzzy logic design for tele-control electrical vehicle,” in International Multi-Conference on Systems, Signals and Devices, pp. 1-6, IEEE, 2012.

A. Hammani, R. Sadoun, N. Rizoug, P. Bartholomeüs, B. Barbedette, and P. L. Moigne, “Influence of the management strategies on the sizing of hybrid supply composed with battery and supercapacitor,” in 2012 First International Conference on Renewable Energies and Vehicular Technology, pp. 1-7, IEEE, 2012.

R. Sadoun, N. Rizoug, P. Bartholumeüs, B. Barbedette, and P. Lemoigne, “Sizing of hybrid supply (battery-supercapacitor) for electric vehicle taking into account the weight of the additional buck-boost chopper,” in 2012 First International Conference on Renewable Energies and Vehicular Technology, pp. 8-14, IEEE, 2012.

N. Rizoug, B. Barbedette, R. Sadoun, and G. Feld, “Starter-alternator propel the vehicle through a hybrid supply: Battery and supercapacitors,” in 2012 Twenty-Seventh Annual IEEE Applied Power Electronics Conference and Exposition (APEC), pp. 2583-2589, IEEE, 2012.

K. Chaaban, N. Rizoug, B. Barbedette, and S. Saudrais, “Model-based development of an embedded steering-by-wire system,” in 2012 8th International Symposium on Mechatronics and its Applications, pp. 1-6, IEEE, 2012.

M. Boukhnifer and A. Raisemche, “Fault tolerant control for induction motor in electrical vehicle,” in 2012 IEEE International Conference on Control Applications, pp. 136-141, IEEE, 2012.

M. Boukhnifer, A. Chaibet, and C. Larouci, “H-infinity robust control of 3-dof helicopter,” in International Multi-Conference on Systems, Signals and Devices, pp. 1-6, IEEE, 2012.

R. Sehab and G. Feld, “An online estimation of energy recovery in an electric vehicle using artemis mission profiles,” in 2012 IEEE Vehicle Power and Propulsion Conference, pp. 333-338, IEEE, 2012.

H. Soubra and K. Chaaban, “Functional size measurement of electronic control units software designed following the autosar standard: A measurement guideline based on the cosmic iso 19761 standard,” in 2012 Joint Conference of the 22nd International Workshop on Software Measurement and the 2012 Seventh International Conference on Software Process and Product Measurement, pp. 78-84, IEEE, oct 17 2012.

H. Soubra, A. Abran, and A. Ramdane-cherif, “A refined functional size measurement procedure for real-time embedded software requirements expressed using the simulink model,” in 2012 Joint Conference of the 22nd International Workshop on Software Measurement and the 2012 Seventh International Conference on Software Process and Product Measurement, pp. 70-77, IEEE, oct 17 2012.

A. Mehel, “The influence of the dispersion model and electrochemical forces on nanoparticle deposition in a turbulent flow,” in ICHMT DIGITAL LIBRARY ONLINE, Begel House Inc., 2012.

B. Sagot and F. Buron, “Effects of flow regime and geometrical parameters on the heat transfer in blow-by gases cyclone separators,” in ICHMT DIGITAL LIBRARY ONLINE, Begel House Inc., 2012.

B. Sagot, “Comparison between available experimental data and theoretical models for the evaluation of deposition due to thermophoresis,” in International Conference on Industrial Ventilation, 2012.

B. Sagot and F. Buron, “Experimental study on the heat transfer in small cyclones,” in International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 2012.

V. Judalet, S. Glaser, V. Kocher, and D. Charondiere, “Virtual reality for real driving: a tool to full the gap between simulators and test tracks,” Actes INRETS, pp. 357-358, 2012.

B. Tchakaloff, S. Saudrais, and J. philippe Babau, “Modèles et transformations de modèles pour l’introduction de la consommation énergétique dans le standard autosar,” in CIEL, 2012.

T. Azib, O. Bethoux, G. Remy, and C. Marchand, “Saturation management of a controlled fuel-cell/ultracapacitor hybrid vehicle,” IEEE Transactions on Vehicular Technology, vol. 60, no. 9, pp. 4127-4138, 2011.

R. Talj, T. Azib, O. Bethoux, G. Remy, C. Marchand, and E. Berthelot, “Parameter analysis of pem fuel cell hysteresis effects for transient load use,” The European Physical Journal-Applied Physics, vol. 54, no. 2, 2011.

R. Sehab, B. barbedette, m. chauvin,”electric vehicle drivetrain: Sizing and validation using general and particular mission profiles”, IEEE-IES ICM’2011, pp. 13-15, 2011.

M. Boukhnifer, A. Chaibet, and C. Larouci, “Passivity based control of teleoperated electric vehicle,” Journal of Asian Electric Vehicles, vol. 9, no. 1, pp. 1483-1490, 2011.

A. Chaibet, C. Larouci, and M. Boukhnifer, “A hybrid electric vehicle transmission chain simulator based on electromechanical actuators,” Journal of Asian Electric Vehicles, vol. 9, no. 2, pp. 1537-1542, 2011.

K. Ejjabraoui, C. Larouci, P. Lefranc, and C. Marchand, “Presizing methodology of dcdc converters using optimization under multiphysic constraints: Application to a buck converter,” IEEE Transactions on Industrial Electronics, vol. 59, no. 7, pp. 2781-2790, 2011.

H. Soubra, “Design of a functional size procedure for real-time embedded software requirements expressed using the simulink model,” Int’l Workshop on Software Measurement (IWSM), Nov. 2011, 2011.

M. Chauvin and B. Lascoup, “Contribution to lightening in the automotive industry: application of the twist-beam rear axle,” REVUE DE METALLURGIE-CAHIERS D INFORMATIONS TECHNIQUES, vol. 108, no. 7-8, pp. 427-435, 2011.

S. Assaf, M. Guerich, and P. Cuvelier, “Vibration and damping analysis of plates with partially covered damping layers,” Acta Acustica united with Acustica, vol. 97, no. 4, pp. 553-568, 2011.

T. Azib, M. Hilairet, O. Bethoux, and R. Talj, “Experimental validation of a passivity based controller for coordination of converters in a fuel cell system,” in Fundamentals and Developments of Fuel Cells Conference (FDFC 2011), pp. 19-21, 2011.

R. Sadoun, N. Rizoug, P. Bartholomeüs, B. Barbedette, and P. L. Moigne, “Optimal sizing of hybrid supply for electric vehicle using li-ion battery and supercapacitor,” in 2011 IEEE Vehicle Power and Propulsion Conference, pp. 1-8, IEEE, 2011.

R. Sadoun, N. Rizoug, P. Bartholomeüs, B. Barbedette, and P. L. Moigne, “Influence of the drive cycles on the sizing of hybrid storage system battery-supercapacitor supplying an electric vehicle,” in IECON 2011-37th Annual Conference of the IEEE Industrial Electronics Society, pp. 4106-4112, IEEE, 2011.

R. Sehab, B. Barbedette, and M. Chauvin, “Electric vehicle drivetrain: Sizing and validation using general and particular mission profiles,” in 2011 IEEE International Conference on Mechatronics, pp. 77-83, IEEE, 2011.

N. Rizoug, G. Feld, B. Barbedette, and R. Sadoun, “Association of batteries and supercapacitors to supply a micro-hybrid vehicle,” in 2011 IEEE Vehicle Power and Propulsion Conference, pp. 1-6, IEEE, 2011.

M. Boukhnifer, A. Chaibet, and C. Larouci, “Experimental h-infinity robust control of aerial vehicle flight,” in 2011 19th Mediterranean conference on control and automation (MED), pp. 242-247, IEEE, 2011.

S. Hima, S. Glaser, A. Chaibet, and B. Vanholme, “Controller design for trajectory tracking of autonomous passenger vehicles,” in 2011 14th International IEEE Conference on Intelligent Transportation Systems (ITSC), pp. 1459-1464, IEEE, 2011.

C. Kaerner, V. Judalet, A. Doerr, J. Kolatschek, M. Hiemer, and O. Koerner, “Method and control unit for activating passenger protection means for a vehicle,” 2011. US Patent 12735135.

C. Ledoux, P. Lefranc, and C. Larouci, “Pre-sizing optimization of an inverter and the passive components,” in Proceedings of the 2011 14th European Conference on Power Electronics and Applications, pp. 1-8, IEEE, 2011.

S. Saudrais and K. Chaaban, “Automatic relocation of autosar components among several ecus,” in Proceedings of the 14th international ACM Sigsoft symposium on Component based software engineering, pp. 199-204, ACM, 2011.

R. Sehab and G. Feld, “Vehicle drivetrain: Emulation and simulation using electric machines,” in 2011 IEEE Vehicle Power and Propulsion Conference, pp. 1-6, IEEE, 2011.

M. Watremez, L. Dubar, and J. Brocail, “New approach of frictional behaviour for modelling of high speed machining,” in AIP Conference Proceedings, vol. 1353, pp. 1788-1793, AIP, 2011.

J. Brocail, M. Watremez, and L. Dubar, “Sensitive analysis of a finite element model of orthogonal cutting,” in AIP Conference Proceedings, vol. 1315, pp. 1047-1052, AIP, 2011.

M. Chauvin and B. Lascoup, “Contribution a l’allegement dans l’automobile: application a la liaison au sol,” Revue de Metallurgie International Journal of Metallurgy, vol. 108, no. 7-8, pp. 427-435, 2011.

M. Hilairet, O. Bethoux, T. Azib, and R. Talj, “Commande non-lineaire d’un systeme pile a combustible supercondensateur,” in CIFA 2011, pp. 1-6, 2011.

G. Remy, M. K. Nejad, T. Azib, O. Bethoux, and C. Marchand, “Structuration de modeles pour l’optimisation parallelisee sous matlab,” in Webinar DIMOCODE de la communauté\Actionneurs Electriques”, 2011.

M. Chauvin and B. Lascoup, “Contribution à la conductivité thermique d’un materiau composite,” in 17es Journées Nationales sur les Composites (JNC17), p. 82, 2011.

B. Sagot, A. Mehel, and G. Antonini, “Evaluation des performances de dépôt d’un réacteur à gradient de température contrôle, appliqué à la capture des fines particules.,” in Congrès Français de Thermique, 2011.

F. T. T. Q. T. Hoang, “Comportement en statique et à l’impact de composites à base de fibres non-tissées de lin et de polypropylène,” in JNC 17, 2011.

T. Azib, O. Bethoux, G. Remy, C. Marchand, and E. Berthelot, “An innovative control strategy of a single converter for hybrid fuel cell/supercapacitor power source,” IEEE Transactions on Industrial Electronics, vol. 57, no. 12, pp. 4024-4031, 2010.

C. Larouci, M. Boukhnifer, and A. Chaibet, “Design of power converters by optimization under multiphysic constraints: application to a two-time-scale ac/dcdc converter,” IEEE Transactions on Industrial Electronics, vol. 57, no. 11, pp. 3746-3753, 2010.

P. Gatignol, C. Potel, and N. Bedrici, “Improvement of the computation of fourier integrals using the complex plane: Application to acoustic fields,” Applied Physics Letters, vol. 96, no. 4, p. 044103, 2010.

J. Brocail, M. Watremez, and L. Dubar, “Identification of a friction model for modelling of orthogonal cutting,” International Journal of Machine Tools and Manufacture, vol. 50, no. 9, pp. 807-814, 2010.

P. C. S. Assaf and M. Guerich, “Vibration and acoustic response of damped sandwich plates immersed in a light or heavy fluid,” Computers and structures, 2010 – Elsevier, vol. 88, no. Issues 1314, 2010.

A. Mehel, A. Tanière, B. Oesterlé, and J. raymond Fontaine, “The influence of an anisotropic langevin dispersion model on the prediction of micro-and nanoparticle deposition in wallbounded turbulent flows,” Journal of Aerosol Science, vol. 41, no. 8, pp. 729-744, 2010.

B. Sagot, G. Antonini, and F. Buron, “Enhancement of jet-to-wall heat transfer using axisymmetric grooved impinging plates,” International Journal of Thermal Sciences, vol. 49, no. 6, pp. 1026-1030, 2010.

T. Q. T. Hoang, F. Lagattu, and J. Brillaud, “Natural fiber-reinforced recycled polypropylene: microstructural and mechanical properties,” Journal of reinforced plastics and composites, vol. 29, no. 2, pp. 209-217, 2010.

M. Kamali-nejad, T. Azib, G. Remy, O. Bethoux, and C. Marchand, “Optimization of a power electronic structure for hybrid fuel cell/ultracapacitors vehicle,” in 2010 IEEE Vehicle Power and Propulsion Conference, pp. 1{6, IEEE, 2010.

T. Azib, R. Talj, O. Bethoux, and C. Marchand, “Sliding mode control and simulation of a hybrid fuel-cell ultracapacitor power system,” in 2010 IEEE International Symposium on Industrial Electronics, pp. 3425-3430, IEEE, 2010.

M. Hilairet, O. Bethoux, T. Azib, and R. Talj, “Interconnection and damping assignment passivity-based control of a fuel cell system,” in 2010 IEEE International Symposium on Industrial Electronics, pp. 219-224, IEEE, 2010.

T. Azib, G. Remy, O. Bethoux, and C. Marchand, “Control strategy with saturation management of a fuel cell/ultracapacitors hybrid vehicule,” in 2010 IEEE Vehicle Power and Propulsion Conference, pp. 1-6, IEEE, 2010.

N. Rizoug, G. Feld, and B. Barbedette, “Hybrid supply for automotive application using supercapacitors,” in 2010 IEEE Vehicle Power and Propulsion Conference, pp. 1-7, IEEE, 2010.

N. Rizoug, G. Feld, and B. Barbedette, “Hybrid supply using supercapacitors for start and stop vehicles,” in 2010 Emobility-Electrical Power Train, pp. 1-6, IEEE, 2010.

K. Ejjabraoui, C. Larouci, P. Lefranc, and C. Marchand, “Pre-sizing of dc-dc converters by optimization under constraints; influence of the control constraint on the optimization results,” in 2010 IEEE International Conference on Industrial Technology, pp. 800-806, IEEE, 2010.

C. Ledoux, P. Lefranc, J. luc Thomas, C. Larouci, J. Cathelin, and D. Diallo, “Modeling and fault modes investigation of a power sharing ac drive,” in IECON 2010-36th Annual Conference on IEEE Industrial Electronics Society, pp. 2504{2509, IEEE, 2010.

C. Ledoux, P. Lefranc, C. Larouci, and J. luc Thomas, “State of the art of monoconverter multiloads applications and associated power electronic devices,” in 2010 IEEE International Symposium on Industrial Electronics, pp. 1092-1096, IEEE, 2010.

K. Ejjabraoui, C. Larouci, P. Lefranc, and C. Marchand, “Design by optimization of a boost converter. integration of the control aspect,” in PCIM’10, 2010.

F. Murzyn and E. C. Ouest, “Assessment of different experimental techniques to investigate the hydraulic jump: do they lead to the same results,” in Hydraulic structures: useful water harvesting systems or relics, pp. 3-36, Keynote lecture, 2010.

F. Rahmi, N. Bedrici-fraï, P. Gatignol, C. Potel, and M. O. Si-chaib, “Generation d’ondes modales dans une structure multicouche periodique, par un faisceau ultrasonore borne sous incidence,” in Conférence Internationale sur le Soudage, le CND et l’Industrie des Métaux, IC-WNDT-MI’10, Centre de Recherche Scientifique et Technique en Soudage et Contrôle (CSC), 2010.

B. Sagot, F. Buron, and G. Antonini, “Transfert thermique dans les séparateurs cyclones appliqués à la dépollution automobile.,” in Congrés Français de Thermique, 2010.

F. T. T. Q. T. Hoang, “Les non-tissés à base de fibres de lin et de polypropylène : caractérisation mécanique et microstructurale pour application automobile,” in Colloque \Le chanvre dans tous ses états : de la plante au composite”, 2010.

S. Saudrais, A. Staikopoulos, and S. Clarke, “Using specification models for runtime adaptations,” International Workshop on Models@ RunTime, 2009.

N. Bedrici, P. Gatignol, and C. Potel, “An iterative method for the interaction between a bounded beam and an interface defect in solids, under kirchholf approximation,” Acta Acustica united with Acustica, vol. 95, no. 2, pp. 189-202, 2009.

N. Bedrici, P. Gatignol, and C. Potel, “Scientific papers-general linear acoustics-an iterative method for the interaction between a bounded beam and an interface defect in solids, under kirchholf approximation,” Acta Acustica United with Acustica-Stuttgart, vol. 95, no. 2,p. 189, 2009.

P. Cuvelier, J. Giardi, A. T. Pham, and B. Auffray, “Reduction of the first torsional mode of a structure by a gyroscopic damper,” MECANIQUE and INDUSTRIES, vol. 10, no. 2, pp. 121-130, 2009.

Z. Jendli, F. Meraghni, J. Fitoussi, and D. Baptiste, “Multi-scales modelling of dynamic behaviour for discontinuous fibre smc composites,” Composites Science and Technology, vol. 69, no. 1, pp. 97-103, 2009.

F. Murzyn and H. Chanson, “Free-surface fluctuations in hydraulic jumps: Experimental observations,” Experimental Thermal and Fluid Science, vol. 33, no. 7, pp. 1055-1064, 2009.

F. Murzyn and H. Chanson, “Experimental investigation of bubbly flow and turbulence in hydraulic jumps,” Environmental Fluid Mechanics, vol. 9, no. 2, pp. 143-159, 2009.

F. Murzyn and H. Chanson, “Two-phase flow measurements in turbulent hydraulic jumps,” Chemical Engineering Research and Design, vol. 87, no. 6, pp. 789-797, 2009.

T. Azib, O. Bethoux, G. Remy, and C. Marchand, “Structure and control strategy for a parallel hybrid fuel cell/supercapacitors power source,” in 2009 IEEE Vehicle Power and Propulsion Conference, pp. 1858-1863, IEEE, 2009.

T. Azib, O. Bethoux, C. Marchand, and E. Berthelot, “Supercapacitors for power assistance in hybrid power source with fuel cell,” in 2009 35th Annual Conference of IEEE Industrial Electronics, pp. 3747-3752, IEEE, 2009.

O. Bethoux, M. Hilairet, and T. Azib, “A new on-line state-of-health monitoring technique dedicated to pem fuel cell,” in 2009 35th Annual Conference of IEEE Industrial Electronics, pp. 2745-2750, IEEE, 2009.

G. F. R. Sehab, N. Rizoug, and B. Barbedette, “Transmission chain for series-parallel hybrid vehicle: sizing and simulation using electric actuators,” in European Meeting on Mechatronics, EMM2009, 2009.

M. Boukhnifer, A. Chaibet, and C. Larouci, “Fault tolerant control of piezoelectric traveling wave ultrasonic motor,” in 2009 IEEE Control Applications,(CCA) and Intelligent Control,(ISIC), pp. 1350-1355, IEEE, 2009.

A. Chaibet, M. Boukhnifer, and C. Larouci, “State estimation for integrated longitudinal and lateral car following control,” in 2009 IEEE Control Applications,(CCA) and Intelligent Control,(ISIC), pp. 1140-1145, IEEE, 2009.

M. Boukhnifer, A. Chaibet, and C. Larouci, “A robust speed control architecture for ultrasonic motor,” in 2009 35th Annual Conference of IEEE Industrial Electronics, pp. 1409-1414, IEEE, 2009.

C. Larouci, A. Chaibet, and M. Boukhnifer, “A vehicle transmission simulator applied to the automated driving,” in VTC Spring 2009-IEEE 69th Vehicular Technology Conference, pp. 1-5, IEEE, 2009.

M. Bunse, M. Schneider, C. Rauh, and V. Judalet, “Method and device for activating passenger protection means,” 2009. US Patent 12088997.

K. Ejjabraoui, C. Larouci, P. Lefranc, and C. Marchand, “A new pre-sizing approach of dc-dc converters, application to a boost converter for the automotive domain,” in 2009 35th Annual Conference of IEEE Industrial Electronics, pp. 3767-3772, IEEE, 2009.

K. Ejjabraoui, C. Larouci, P. Lefranc, and C. Marchand, “A pre-sizing approach of dc-dc converters, application to design a buck converter for the automotive domain,” in 2009 IEEE 6th International Power Electronics and Motion Control Conference, pp. 517-523, IEEE, 2009.

K. Chaaban, P. Leserf, and S. Saudrais, “Steer-by-wire system development using autosar methodology,” in 2009 IEEE Conference on Emerging Technologies and Factory Automation, pp. 1-8, IEEE, 2009.

K. Chaaban and P. Leserf, “Simulation of a steer-by-wire system using flexray-based ecu network,” in 2009 International Conference on Advances in Computational Tools for Engineering Applications, pp. 21-26, IEEE, 2009.

R. Sehab, “An aerodynamic load for an electrohydraulic actuator: Advanced modelling and implementation using electric actuators,” in 13th World Multiconference on Systemics, Cybernetics and Informatics, pp. pp. 211-217, 2009.

A. Mehel, A. Taniere, B. Oesterle, and J. r Fontaine,“Prediction of nanoparticle deposition in channel and duct flows: A simple method to implement new turbulent dispersion models in cfd tools,” in ICHMT DIGITAL LIBRARY ONLINE, Begel House Inc., 2009.

S. Aubonnet, P. Maire, D. Lamourette, and B. E. Sagot, “Demand and dilution mask regulator and method of regulating additional oxygen in the mask regulator,” 2009. US Patent 7584753.

P. Gatignol, C. Potel, and N. Bedrici-frai, “Simulation numérique de faisceaux acoustiques bornés: méthode de calcul rapide par intégration dans le plan complexe,” Congrès français de mécanique, 2009.

P. Cuvelier, J. Giardi, A. T. Pham, and B. Auffray, “Atténuation du premier mode de torsion d’une structure par un batteur gyroscopique,” Mechanics and Industry, vol. 10, no. 2, pp. 121-130, 2009.

T. Azib, “Assistance énergétique à base de supercondensateurs pour les sources hybrides à pile à combustible: applications automobiles,” in JCGE2009, Jeunes Chercheurs en Génie Electrique, pp. pp. 11-18, 2009.

T. Azib, O. Bethoux, G. Remy, C. Marchand, and Eric Berthelot, “Comparaison d’architectures d’hybridation d’une pile à combustible avec des supercondensateurs,” in EF 2009, Electrotechnique du futur, p. 11 pages, 2009.

J. christophe Walrick, M. Grésil, and P. Parneix, “Influence sur la tenue mécanique de l’insertion d’une fonction de protection électromagnétique au sein de composites à renforts de fibres de verre= strength mechanical ,” in JNC 16, p. 10 p., AMAC, 2009.

A. Fall, M. Boukhnifer, and A. Ferreira, “Plug-in robust compensator for a 3 dof piezoelectric nanorobotic positioner,” IFAC Proceedings Volumes, vol. 41, no. 2, pp. 9248-9253, 2008.

M. Boukhnifer, A. Ferreira, and F. Kratz, “Design methodology for robust and fault-tolerant control of a microprehensile microrobot-on-chip,” IFAC Proceedings Volumes, vol. 41, no. 2, pp. 11823-11828, 2008.

S. Clarke, A. Staikopoulos, S. Saudrais, J. Vzquez-salceda, V. Dignum, W. Vasconscelos, J. Padget, T. Quillinan, L. Ceccaroni, and C. Reed, “Alive: A model driven approach to coordination and organisation for dynamic services engineering,” Proc. MODELS, 2008.

J. Brocail, M. Watremez, L. Dubar, and B. Bourouga, “Contact and friction analysis at tool-chip interface to high-speed machining,” International Journal of Material Forming, vol. 1, no. 1, pp. 1407-1410, 2008.

E. Guillot, B. Bourouga, B. Garnier, and J. Brocail, “Measurement of the thermal contact parameters at a workpiecetool interface in a hsm process,” International Journal of Material Forming, vol. 1, no. 1, pp. 1419-1422, 2008.

F. Murzyn and H. Chanson, “Experimental assessment of scale effects affecting two-phase flow properties in hydraulic jumps,” Experiments in Fluids, vol. 45, no. 3, pp. 513-521, 2008.

B. Sagot, G. Antonini, A. Christgen, and F. Buron, “Jet impingement heat transfer on a flat plate at a constant wall temperature,” International Journal of Thermal Sciences, vol. 47, no. 12, pp. 1610-1619, 2008.

M. Gresil, P. Parniex, J. Boulay, C. Cheype, J. Walrick, B. Lascoup, D. Placko, and M. Lemistre, “Mechanical effect and shielding effectiveness of the insertion of metallic scren in glass and carbon composite,” ECCM13 (juin 2008) 13ème conférence européenne sur les matériaux composites à Stockholm (Suède), 2008.

M. Boukhnifer and A. Ferreira, “Fault tolerant control of a bilateral teleoperated micromanipulation system,” in 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 412-417, IEEE, 2008.

T. Slama, M. Boukhnifer, D. Aubry, A. Ferreira, and F. Kratz, “Challenges of robustness/transparency of scaled bilateral teleoperation systems,” in 2008 10th IEEE International Workshop on Advanced Motion Control, pp. 550-555, IEEE, 2008.

A. Chaibet, C. Larouci, and E. Grunn, “An electric simulator of a vehicle transmission chain coupled to a vehicle dynamic model,” in 2008 34th Annual Conference of IEEE Industrial Electronics, pp. 1578-1583, IEEE, nov 10 2008.

A. Chaibet, L. Nouveliere, S. Hima, and S. Mammar, “Robust second order sliding mode observer for the estimation of the vehicle states,” in AIP Conference Proceedings, vol. 1019, pp. 27-32, AIP, 2008.

C. Larouci, E. Grunn, and A. Chaibet, “Coupling of a vehicle transmission chain simulator using a sliding mode control with a vehicle dynamic model,” in 2008 IEEE Vehicle Power and Propulsion Conference, pp. 1-6, IEEE, 2008.

C. Larouci, “Pre-sizing of power converters using optimization under constraints,” in 2008 IEEE International Conference on Industrial Technology, pp. 1-6, IEEE, 2008.

L. David, A. Mehel, L. Tarrade, A. Texier, and M. Larinier, “Modification of vortex structures in fishways by cylinder adjunction,” in 13th International Symposium on Flow Visualization – ISFV13, (Nice, France), pp. 1667-1676, Jul 2008.

M. Boukhnifer and A. Ferreira, “Loop shaping bilateral controller for a two-fingered telemicromanipulation system,” IEEE Transactions on Control Systems Technology, vol. 15, no. 5, pp. 891-905, 2007.

S. Saudrais, O. Barais, L. Duchien, and N. Plouzeau, “From formal specifications to qos monitors.,” Journal of Object Technology, vol. 6, no. 11, pp. 1-20, 2007.

A. Mehel, C. Gabillet, and H. Djeridi, “Analysis of the flow pattern modifications in a bubbly couette-taylor flow,” Physics of Fluids, vol. 19, no. 11, p. 118101, 2007.

F. Murzyn, D. Mouazé, and J. Chaplin, “Airwater interface dynamic and free surface features in hydraulic jumps,” Journal of Hydraulic Research, vol. 45, no. 5, pp. 679-685, 2007.

J. Gouatarbes, M. Boukhnifer, A. Ferreira, D. Aubry, and P. Magnan, “Robust control for ultrasonic motor operating within harsh environments,” in 2007 IEEE/ASME international conference on advanced intelligent mechatronics, pp. 1-6, IEEE, 2007.

M. Boukhnifer and A. Ferreira, “Shaping indirect field oriented control for induction motor with luenberger observer,” in 2007 IEEE/ASME international conference on advanced intelligent mechatronics, pp. 1-6, IEEE, 2007.

C. Larouci, E. Dehondt, A. Harakat, and G. Feld, “Modeling and control of the vehicle transmission system using electric actuators; integration of a clutch,” in 2007 IEEE International Symposium on Industrial Electronics, pp. 2202-2207, IEEE, 2007.

S. Saudrais, N. Plouzeau, and O. Barais, “Integration of time issues into component-based applications,” in International Symposium on Component-Based Software Engineering, pp. 173-188, Springer, Berlin, Heidelberg, 2007.

R. Sehab, “Fuzzy pid supervision for a nonlinear, system: design and implementation,” in NAFIPS 2007-2007 Annual Meeting of the North American Fuzzy Information Processing Society, pp. 36-41, IEEE, 2007.

J. Brocail, M. Watremez, L. Dubar, and B. Bourouga, “High speed machining: A new approach to friction analysis at toolchip interface,” in AIP Conference Proceedings, vol. 907, pp. 685{690, AIP, 2007.

M. Boukhnifer, “Commande robuste d’une machine asynchrone alimentée par un onduleur multiniveau,” Revue internationale de génie électrique, vol. 10, no. 6, pp. 717-749, 2007.

B. Sagot, G. Antonini, and F. Buron, “Transfert thermique par jet impactant sur plaque plane corruguée.,” Congrés Franais de thermique, Ile de Embiez France, 2007.

O. A. F. Lagattu, L.chocinski, and T.q.lam, “Les Eco-matériaux : enjeux, propriétés et perspectives,” in CFM, 2007.

M. Boukhnifer and A. Ferreira, “Wave-based passive control for transparent microteleoperation system,” Robotics and Autonomous Systems, vol. 54, no. 7, pp. 601-615, 2006.

A. Mehel, C. Gabillet, and H. Djeridi, “Bubble effect on the structures of weakly turbulent couette taylor flow,” Journal of fluids engineering, vol. 128, no. 4, pp. 819-831, 2006.

F. Murzyn, D. Mouazé, and J. Chaplin, “Flow visualization and free surface length scales measurements in a horizontal jet beneath a free surface,” Experimental thermal and fluid science, vol. 30, no. 7, pp. 703-710, 2006.

D. Coutellier, J. Walrick, and P. Geoffroy, “Presentation of a methodology for delamination detection within laminated structures,” Composites Science and Technology, vol. 66, no. 6, pp. 837-845, 2006.

J. christophe Walrick, S. Assaf, and P. Longrais, “Numerical optimization for car suspension under dynamic loading.,” Mecanique and Industries, vol. 7, no. 5, pp. 445-452, 2006.

M. Boukhnifer and A. Ferreira, “Stability and transparency for scaled teleoperation system,” in 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 4217-4222, IEEE, 2006.

M. Boukhnifer and S. Chaib, “Control for induction motor fed by five level inverter with sliding mode observer,” in 2006 IEEE Conference on Computer Aided Control System Design, 2006 IEEE International Conference on Control Applications, 2006

IEEE International Symposium on Intelligent Control, pp. 3241-3246, IEEE, 2006.
C. Larouci, G. Feld, and J. Didier, “A simulator of the vehicle transmission chain using electric machines,” in 2006 IEEE International Symposium on Industrial Electronics, vol. 4, pp. 3096-3101, IEEE, 2006.

C. Larouci, G. Feld, and J. Didier, “Modeling and control of the vehicle transmission chain using electric actuators,” in IECON 2006-32nd Annual Conference on IEEE Industrial Electronics, pp. 4066-4071, IEEE, 2006.

S. Saudrais, O. Barais, and L. Duchien, “Using model-driven engineering to generate qos monitors from a formal specification,” in 2006 10th IEEE International Enterprise Distributed Object Computing Conference Workshops (EDOCW’06), pp. 45-45, IEEE, oct 16 2006.

A. Chaibet, “Contrôle latéral et longitudinal pour le suivi de véhicule,” PhD, Université d’Evry Val d”Essonne, France, 2006.

J. Christophe Walrick, S. Assaf, and P. Longrais, “Optimisation numérique d’une suspension de véhicule en sollicitation dynamique,” Mechanics and Industry, vol. 7, no. 5-6, pp. 445-452, 2006.

J. Fitoussi, F. Meraghni, Z. Jendli, G. Hug, and D. Baptiste, “Experimental methodology for high strain-rates tensile behaviour analysis of polymer matrix composites,” Composites Science and Technology, vol. 65, no. 14, pp. 2174-2188, 2005.

Z. Jendli, J. Fitoussi, F. Meraghni, and D. Baptiste, “Anisotropic strain rate effects on the fibrematrix interface decohesion in sheet moulding compound composites,” Composites science and technology, vol. 65, no. 3-4, pp. 387-393, 2005.

F. Murzyn, D. Mouaze, and J. Chaplin, “Optical fibre probe measurements of bubbly flow in hydraulic jumps,” International Journal of Multiphase Flow, vol. 31, no. 1, pp. 141-154, 2005.

D. Mouazé, F. Murzyn, and J. Chaplin, “Free surface length scale estimation in hydraulic jumps,” Journal of Fluids Engineering, vol. 127, no. 6, pp. 1191-1193, 2005.

F. Murzyn and M. Belorgey, \Experimental investigation of the grid-generated turbulence features in a free surface flow,” Experimental thermal and fluid science, vol. 29, no. 8, pp. 925-935, 2005.

F. Murzyn and M. Bélorgey, “Wave influence on turbulence length scales in free surface channel flows,” Experimental thermal and fluid science, vol. 29, no. 2, pp. 179-187, 2005.

F. Lagattu, M. Lafarie-frenot, T. Lam, and J. Brillaud, “Experimental characterisation of overstress accommodation in notched cfrp composite laminates,” Composite Structures, vol. 67, no. 3, pp. 347-357, 2005.

M. Boukhnifer and A. Ferreira, “Passive bilateral control of teleoperators under time delay and scaling factors,” in Proceedings of the 44th IEEE Conference on Decision and Control, pp. 6972-6977, IEEE, dec 15 2005.

M. Boukhnifer, A. Ferreira, and J. G. Fontaine, “Loop shaping robust control for scaled teleoperation system,” in Proceedings of the 44th IEEE Conference on Decision and Control, pp. 7894-7899, IEEE, dec 15 2005.

M. Boukhnifer and A. Ferreira, “Passivity based control for micro-teleoperation system,” in 2005 IEEE International Conference on Robotics and Biomimetics-ROBIO, pp. 416-421, IEEE, 2005.

M. Boukhnifer and A. Ferreira, “H/sub/spl infin//loop shaping for stabilization and robustness of a telemicromanipulation system,” in 2005 IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 127-132, IEEE, 2005.

A. Chaibet, L. Nouveliere, S. Mammar, and M. Netto, “Backstepping control synthesis for automated low speed vehicle,” in Proceedings of the 2005, American Control Conference, 2005., pp. 447-452, IEEE, 2005.

C. Larouci, “Optimization of a 42v/14v dc-dc converter for vehicular electrical network,” in 2005 IEEE 61st Vehicular Technology Conference, vol. 5, pp. 2934-2938, IEEE, 2005.

C. Larouci, J. paul Didier, M. Selvez, S. Prado, R. Couturier, E. Ohayone, and X. Retailleaux, “L’électronique de puissance et le véhicule de demain; optimisation d’un convertisseur 42 v-14 v sous des contraintes d’encombrement, de rendement, de compatibilité,” REE. Revue de l’électricité et de l’électronique, no. 1, pp. 73-79, 2005.

Z. Jendli, J. Fitoussi, F. Meraghni, and D. Baptiste, “Comportement et endommagement dynamique multi-échelle de composites smc-r26,” Matériaux and Techniques, vol. 93, no. 3-4, pp. 93-102, 2005.

Z. Jendli, F. Meraghni, J. Fitoussi, and D. Baptiste, “Modélisation multiéchelle du comportement dynamique de composites smc r26,” in JNC 14, p. pp., 2005.

Z. Jendli, F. Meraghni, J. Fitoussi, and D. Baptiste, “Modalisation micromécanique de l’effet de la vitesse de déformation sur le comportement endommagé de matériaux composites à fibres discontinues,” in CFM 05, p. pp., 2005.

J. Fitoussi, F. Meraghni, Z. Jendli, G. Hug, and D. Baptiste, “Méthodologie expérimentale et modélisation micromécanique du comportement mécanique de matériaux composites sous sollicitations dynamiques,” in Colloque MECAMAT, p. 8 pages, 2005.

J. B. F. Lagattu, T. Lam, and J.brillaud,“Polymère recyclé renforcé par des fibres d’origine végétale: aspects microstructuraux et mécaniques,” in JNC14, 2005.

J. p Mariot, J. y K’nevez, and B. Barbedette, “Tripod and ball joint automotive transmission kinetostatic model including friction,” Multibody System Dynamics, vol. 11, no. 2, pp. 127-145, 2004.

J. Mariot, J. K’nevez, and B. Barbedette, “Friction models of automotive transmissions equipped with tripod joints,” Multi-body Dynamics: Monitoring and Simulation Techniques III, p. 351, 2004.

C. Manceau and B. Barbedette, “Contribution of the shift in characteristic spinal points during yoku-tsuki in the analysis of lumbodynia in karatekas: 3 cases,” KS-Kinesitherapie Scientifique, no. 445, pp. 39-42, 2004.

M. Boukhnifer, A. Ferreira, and J. g Fontaine, “Scaled teleoperation controller design for micromanipulation over internet,” in IEEE International Conference on Robotics and Automation, 2004. Proceedings. ICRA’04. 2004, vol. 5, pp. 4577-4583, IEEE, 2004.

M. Boukhnifer and A. Ferreira, “H2 optimal controller design for micro-teleoperation with delay.,” in IROS, pp. 224-229, 2004.

A. Germain, M. Chauvin, and M. Buannec, “Boîte de vitesses pour véhicule automobile comprenant un dispositif de lubrification forcée des roues d’engrenages,” 2004. FR Patent FR2877065.

D. Baptiste, J. Fitoussi, Z. Jendli, and F. Meraghni, “Micromechanical analysis of strain rate effect on damage evolution in discontinuous fibre composites,” in Proceedings of ECCM 11, p. 10 pages, ECCM 11, 2004.

D. Baptiste, J. Fitoussi, Z. Jendli, and F. Meraghni, “On the strain rate dependent behaviour of short fibre reinforced composites,” in Proceedings of DYMAT, pp. pp. 143-148, DYMAT, 2004.

J. Chaplin, D. Mouaze, and F. Murzyn, “Turbulence at free surface in hydraulic jumps,” in HT FED 2004 ASME Heat Transfer / Fluids Engineering Summer Conference, Charlotte (NC, USA), 2004.

T. Lam, F. Lagattu, J. Brillaud, and J. Barbier, “Influence of natural fibre reinforcement on microstructural and mechanical properties of polypropylene,” in ECCM11 congress in Greece, 2004.

C. Manceau and B. Barbedette, “Contribution du déplacement de points caractéristiques rachidiens lors du yaku-tsuki à l’analyse des lombalgies de karatékas: à propos de 3 cas,” Kinésithérapie scientifique, no. 445, 2004.

T. Lam, F. Lagattu, G. Bezine, and J. Brillaud, “Comportement du polypropylène à la fissuration : étude expérimentale et numérique,” in DE.PO.S.19, 2004.

C. Larouci, J. p Keradec, J. p Ferrieux, L. Gerbaud, and J. Roudet, “Copper losses of flyback transformer: Search for analytical expressions,” IEEE transactions on magnetics, vol. 39, no. 3, pp. 1745-1748, 2003.

M. Boukhnifer and A. Ferreira, “Kinematic analysis of a two-finngered haptic interface for dexterous micromanipulation,” in Proceedings 2003 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM 2003), vol. 1, pp. 604-609, IEEE, 2003.

C. Larouci, J. Didier, A. Aldebert, O. Bouquet, A. Prost, and J. Vauchel, “Optimal design of a synchronous dc-dc converter using analytical models and a dedicated optimization tool,” in IECON’03. 29th Annual Conference of the IEEE Industrial Electronics Society (IEEE Cat. No. 03CH37468), vol. 2, pp. 1623-1628, IEEE, 2003.

J. T.q.lam, F.lagattu, and J.brillaud, “Influence du recyclage sur les propriétés microstructurales et mécaniques du polypropylène,” in DE.PO.S.18, 2003.